Morse throttle slips
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=3840
Printed Date: January-17-2025 at 5:59pm
Topic: Morse throttle slips
Posted By: gjsullivan
Subject: Morse throttle slips
Date Posted: June-11-2006 at 12:38pm
I have a 90 sport and the Morse MV2 throttle slips back when running. I thought I saw an adjustment post on this site a few years ago but can't find it now.
Does anyone know how to make an adjustment on the throttle control so it stays in position?
Thanks,
Glenn
|
Replies:
Posted By: David F
Date Posted: June-12-2006 at 10:49am
I just read the entire Owner's Manual for my Morse MV-2 control. The manual does not mention any adjustment to solve your condition. I can only offer the suggestion that you possibly go to lighter spring on the carburetor arm. I will warn against removing the spring as it serves a very important safety purpose in returning the carburetor to idle if the throttle cable should break.
-------------
|
Posted By: Greg_SA
Date Posted: April-19-2007 at 12:48pm
Hi,
Did you ever solve the problem on your throttle slipping?
Maybe the "built-in friction drag" wears out? Maybe there is something that can be replaced inside the MV-2?
Regards,
Greg
|
|