Print Page | Close Window

Looking for Ramlin Dimensions

Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: General Discussion
Forum Discription: Anything Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=38538
Printed Date: March-01-2025 at 2:51am


Topic: Looking for Ramlin Dimensions
Posted By: Valcour
Subject: Looking for Ramlin Dimensions
Date Posted: May-01-2016 at 6:34pm

Hey folks,

I plan to do some trailer rehab on a Ramlin for a 1994 176. The boat is in storage, and not immediately accessible. So I'm wondering if anyone has a similar vintage Ramlin around that they could take some quick measurements.

Specifically, I'm looking for the dimensions of the centerline square tubing onto which the crash pad post mounts. I would guess 3x3" but know better than to rely on memory..

Also, need the fore-and-aft measurement of the base plate of the crash pad post. I'm planning to add a steel plate to back up the bolts that hold the post to the trailer, and want to make sure it's the correct size.

Thanks,

Charlie


Print Page | Close Window