Distributor Clips
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: Common Questions
Forum Discription: Visit here first for common questions regarding your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=38642
Printed Date: November-24-2024 at 9:28am
Topic: Distributor Clips
Posted By: 86ER
Subject: Distributor Clips
Date Posted: May-16-2016 at 1:33pm
| I've got an '86 PCM 351 with the distributor that uses clips to retain the cap. These are the clips that screw down to the distributor on one end. Does anyone know where I can get these? I can't find them anywhere. |
Replies:
Posted By: DrCC
Date Posted: May-16-2016 at 2:54pm
| Try ebay. |
Posted By: phatsat67
Date Posted: May-16-2016 at 3:57pm
| Probably NLA? Are they broken ? They tend to get bent and don't hold the cap down right. I stick them in a pair of channel locks and make sure they are at right angles top and bottom. Squeez down on them and they will satay at the proper angle and be tighter on the cap. |
Posted By: DayTony
Date Posted: May-16-2016 at 6:05pm
 These? I believe i bought some on amazon last season. I will have to look through my records to find the link ------------- 1988 Barefoot nautique-454 |
Posted By: DayTony
Date Posted: May-16-2016 at 6:07pm
|
nope sorry got them from basic power industries.com MAL9-26800 Clip Kit for Mallory Tall Cap 670 they were 8.95 but shipping was $12  But i needed them and $20 was reasonable to be back on the water. IN the meantime though you can easily get away with positioning the cap and using long thin zip ties to hold it down. I have done that before and its a great short term solution ------------- 1988 Barefoot nautique-454 |
Posted By: phatsat67
Date Posted: May-16-2016 at 6:33pm
| Those are for the Mallory dizzy not the factory prestolite |
Posted By: 86ER
Date Posted: May-16-2016 at 10:09pm
| No luck on Ebay unless I pick up a complete distributor, which I'm considering. My clips were a little loose with the new cap, so I tried tweaking them a little and one snapped, so yes I'm using wire ties to hold it down at the moment. Any idea if a 460 ci distributor will fit in the 351? There are several NOS units for sale on Ebay. I would imagine the advance curve is different, but that's easily corrected. I may just go ahead and get a Pertronix distributor. They are a heck of a lot cheaper than the Mallory. |
Posted By: DrCC
Date Posted: May-16-2016 at 10:30pm
|
http://www.ebay.com/itm/Ford-Pickup-Truck-Distributor-Cap-Spring-Clips-/111852133920?hash=item1a0ae81e20:g:Oi8AAOSwUdlWcmex&vxp=mtr" rel="nofollow - Ebay Is this not it ? |
Posted By: gun-driver
Date Posted: May-16-2016 at 10:33pm
|
I have a distributor I'll sell ya cheap needs the gear. http://s256.photobucket.com/user/gun-driver/media/DSC01265_zps39eacc71.jpg.html" rel="nofollow">  http://s256.photobucket.com/user/gun-driver/media/DSC01270_zpsf2cef49f.jpg.html" rel="nofollow"> 
|
Posted By: 86ER
Date Posted: May-17-2016 at 7:32am
| Let me know how much. |
Posted By: gun-driver
Date Posted: May-17-2016 at 3:01pm
| PM sent |