Propeller Cage Roller Installation
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: General Discussion
Forum Discription: Anything Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=38737
Printed Date: November-30-2024 at 7:34am
Topic: Propeller Cage Roller Installation
Posted By: Jonny Quest
Subject: Propeller Cage Roller Installation
Date Posted: May-29-2016 at 12:25am
|
Just a little show 'n tell... I got tired of scraping the propeller cage on my steep driveway, so I installed some rollers. I used the marine version built by Pak Industries. http://pakindustries.com/marine.html" rel="nofollow - Link to rollers Photo shows the fabricated brackets welded onto the trailer: From the marks on the roller, you can see that the rollers were put to good use on the driveway this morning!  JQ ------------- Current 2003 Ski Nautique 206 Limited Previous 2001 Ski Nautique Open Bow 1994 Ski Nautique Open Bow Aqua skiing, ergo sum |