1984 Ski Natique Wheel Bearing
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=38975
Printed Date: November-16-2024 at 6:52pm
Topic: 1984 Ski Natique Wheel Bearing
Posted By: Jabel1986
Subject: 1984 Ski Natique Wheel Bearing
Date Posted: June-12-2016 at 8:12pm
| I am new to the boating forum, I have a 1984 Ski Natique and today the wheel bearing burnt out and the grease fitting is gone. It looks like the wheel needs to replaced. I left the boat at a tire shop and was wondering if anyone knows the parts I will have to buy and where to buy them? I was also wondering if there is a different modern arrangement to instal instead of grease added seals? I was also wondering if anyone knows how to get a schematic of the 1984 correct craft trailer. Everything is original! The hub looks def cracked. The grease housing is gone. Any help will be greatly appreciated. |
Replies:
Posted By: Jonny Quest
Date Posted: June-12-2016 at 8:42pm
You will need to measure the axle spindles to be sure. Get a good micrometer or caliper. The diagram will show you the measurements to take. With those measurements, you can order the proper bearings, races and seals. Image from etrailer.com JQ ------------- Current 2003 Ski Nautique 206 Limited Previous 2001 Ski Nautique Open Bow 1994 Ski Nautique Open Bow Aqua skiing, ergo sum |
Posted By: OldSchoolBlue84
Date Posted: June-13-2016 at 12:05am
|
Assuming it's an original trailer, below is what I used. Good luck 1984 Correct Craft Trailer #3 Trailer (single axle) Tires: 205/75D/14 - 5 Bolt (F78-14 or G78-14) Trailer Tongue: 3500 Gross Weight Spindle = #84 (1-3/8" inner, 1-1/16" outer) Inner Bearing = L68149 Inner Race = L44610 Inner Seal = 10-19 Outer Bearing = L44649 ------------- Kostas http://www.correctcraftfan.com/diaries/details.asp?ID=6700&sort=&pagenum=1" rel="nofollow - 1984 Ski Nautique 2001 |
Posted By: Jonny Quest
Date Posted: June-13-2016 at 12:20am
|
OldSchool nailed it. Your axle most likely has a #84 spindle. You can do a search for "number 84 spindle" and get plenty of options. In my area, many of the local auto parts stores carry these bearings, races and seals. My personal preference is Made in the USA stuff. I've had some bad experiences with some cheap Asian bearings. JQ ------------- Current 2003 Ski Nautique 206 Limited Previous 2001 Ski Nautique Open Bow 1994 Ski Nautique Open Bow Aqua skiing, ergo sum |