Print Page | Close Window

Non OEM flame arrestor/air filter Printed From: CorrectCraftFan.com Category: Repairs and Maintenance Forum Name: Boat Maintenance Forum Discription: Discuss maintenance of your Correct Craft URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=39157 Printed Date: November-16-2024 at 4:30pm Topic: Non OEM flame arrestor/air filter Posted By: lakejimmyjon Subject: Non OEM flame arrestor/air filter Date Posted: June-30-2016 at 3:19pm I have a breather hose from the neck of my oil fill laying on the engine. I'm assuming that there should be a place to connect it to the flame arrestor/air filter. The one on my carburetor is stamped Mercruiser which must not be original and does not have a place to connect the breather hose to. Where can I source the correct unit that would have the connection point for the breather hose? Replies: Posted By: Dreaming Date Posted: June-30-2016 at 3:40pm Nautique parts (look to the top of the page for a link) SkiDIm, N3, etc.   they are about $45 new.    My old one had an added hose fitting that was screwed down with the thumb screw that holds the FA to the carb, so that could be another option.    Posted By: lakejimmyjon Date Posted: July-01-2016 at 12:09pm Thanks, Kris

Print Page | Close Window