Gasket Help needed, Intake Manifold
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Engine Repair
Forum Discription: Engine problems and solutions
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=39168
Printed Date: October-07-2024 at 8:34am
Topic: Gasket Help needed, Intake Manifold
Posted By: Conor
Subject: Gasket Help needed, Intake Manifold
Date Posted: July-01-2016 at 4:04pm
I need some assistance locating the correct gasket. I have a 1989 Ski Nautique with the original PCM 351 engine. I am need of the gasket the goes between the intake manifold and the metal spacer.
I have tried the following two gaskets however neither one of these gaskets completely sealed the gap.
Victor Reinz G30618 Felpro 60616
As far as I know the intake manifold is original. Any help would be appreciated.
------------- 1989 Ski Nautique
|
Replies:
Posted By: gun-driver
Date Posted: July-01-2016 at 4:13pm
What gap are you talking about?
|
Posted By: Gary S
Date Posted: July-01-2016 at 4:28pm
You need a genuine PCM gasket or you have to make your own. Go to skidim.com and look at item 1127. If you have a PCM dealer they should have it the part number is on that above site.
------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS 95 Nautique Super Sport
|
Posted By: Conor
Date Posted: July-01-2016 at 4:29pm
The gaskets that I have tried do not exactly match the opening on the intake manifold and when the engine is running there is air leaking out. of an unsealed gap between the spacer and the intake manifold.
------------- 1989 Ski Nautique
|
|