81 part for sale
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=3923
Printed Date: November-22-2024 at 5:54pm
Topic: 81 part for sale
Posted By: 79nautique
Subject: 81 part for sale
Date Posted: June-20-2006 at 2:03pm
|
I have a few items for sale out of a 1981 SN, most is already gone what I still have are:
shift cables steering cable clamp block rudder tiller arm aluminum engine craddle complete mirror - sold to paul carpenter waiting to recieve check dash gauges except fuel/tach and speedo's aluminum gas tank dash wiring harness ski pylon with ring & finger removed. I've got a pair of mufflers as well. there maybe a couple of other items but that's all that I recall being left. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique |
Replies:
Posted By: nautiquefanatic
Date Posted: June-20-2006 at 3:06pm
|
price for complete mirror with shipping to NC
helm minus wheel with shipping to NC zip code is 28001 Thanks, Paul ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=3448" rel="nofollow - 1973 Ski Nautique http://correctcraftfan.com/diaries/details.asp?ID=830" rel="nofollow - 1979 Barefoot Nautique |
Posted By: skicat
Date Posted: June-20-2006 at 3:26pm
|
Do you have the ring & finger for the pylon & it is just removed or do you not have the ring & finger? I would be interested if you have it all.
Thanks, Greg ------------- Greg http://www.correctcraftfan.com/diaries/details.asp?ID=2427&yrstart=1981&yrend=1985" rel="nofollow - 86 BFN |
Posted By: 79nautique
Date Posted: June-20-2006 at 3:56pm
|
e-mail me an offer paul ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique |
Posted By: Nautique Mike
Date Posted: June-20-2006 at 5:37pm
|
Is that helm peice an oval base to the teleflex steering wheel or somthing different? If it is part of the wheel I would be interested in that. Price?
I am also looking for a single or nice pair of Correct Craft side name plates with white background. Thanks- NM ------------- Nautique Mike |
Posted By: DrCC
Date Posted: June-20-2006 at 8:36pm
| Looking for shift and throttle cables, morse "Red Jacket" only. |
Posted By: 79nautique
Date Posted: June-21-2006 at 8:01am
|
Mike I believe it is the oval based teleflex.
non-red-jacket cables and no shifter no name plates ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique |
Posted By: nautiquefanatic
Date Posted: June-21-2006 at 10:05am
|
$60 shipped for the two items asked about....
"price for complete mirror with shipping to NC helm minus wheel with shipping to NC zip code is 28001" Please let me know. pcarpenter2@carolina.rr.com I can do paypal or money order, if you will accept. Thanks: Paul ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=3448" rel="nofollow - 1973 Ski Nautique http://correctcraftfan.com/diaries/details.asp?ID=830" rel="nofollow - 1979 Barefoot Nautique |
Posted By: 79nautique
Date Posted: June-21-2006 at 10:46am
|
paul, do you need the cable for the helm or just the helm? ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique |
Posted By: nautiquefanatic
Date Posted: June-21-2006 at 11:06am
|
chris, i do not need the cable, just the helm itself! someone else may need the cable. I will be away from this computer for the next couple of hours....I will check back in with you when I return.
Thanks, Paul ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=3448" rel="nofollow - 1973 Ski Nautique http://correctcraftfan.com/diaries/details.asp?ID=830" rel="nofollow - 1979 Barefoot Nautique |
Posted By: 79nautique
Date Posted: June-22-2006 at 8:17am
|
pual did you get my e-mail? ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique |
Posted By: dpresswood
Date Posted: June-22-2006 at 1:44pm
| I am very interested in the pylon and I preffer that the top is empty with no ring with finger or anything else. Is it still available and how much do you want? |
Posted By: 79nautique
Date Posted: June-22-2006 at 1:59pm
|
yes it is, I'd like to get $200 for it shipped. Where are you located? ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique |
Posted By: dpresswood
Date Posted: June-22-2006 at 2:09pm
| I am in Bradenton Fl. 34209, Do you have pic of pylon and why are you selling it? Is your '79 still for sale? |
Posted By: dpresswood
Date Posted: June-22-2006 at 2:24pm
| What is an engine craddle??? |
Posted By: 79nautique
Date Posted: June-22-2006 at 2:33pm
|
It's not out of my 79 it and the cradle are out of the 81 I got fron corey when I bought a trailer off of him. On the 81 and newer models they used an aluminum frame/craddle to mount the engine to the stringers.
On my 79 the motor and tranny mounts are bolted directly to the stringers. On the 81 they are mounted to this frame and then the frame is mounted to the stringer's ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique |
Posted By: 79nautique
Date Posted: June-22-2006 at 2:36pm
|
I've got pictures of it just not with me, I can have them to you this week-end put it's in really good shape and they did a nice job removing the ring and finger and didn't nick or damage anything when they removed it. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique |
Posted By: dpresswood
Date Posted: June-23-2006 at 10:05pm
| I look forward to hearing from you and am definately interested. I am not sure but think that the 81 pylon is the same as the 80 ski nautique which I have. Do you know? I will wait for the picture and your reply. |
Posted By: stang72
Date Posted: June-24-2006 at 12:25am
The reason the ring finger is missing is...because I bought it before 79 got the rest! ------------- stang Face plants are not that funny when it's you face! http://www.correctcraftfan.com/diaries/images/3720/photo1.jpg" rel="nofollow - The Super Air |
Posted By: dpresswood
Date Posted: June-24-2006 at 10:50am
| I don't want a ring, I have a stainless extension with a trick release and it has a top to hold the rope made by Mel Winkler. I am looking for a nice pylon that I can have powdercoated and not be without a ski ride for a month.Send any pics you have and we can close this up if it will interchange. |
Posted By: 79nautique
Date Posted: June-25-2006 at 8:49am
dpresswood e-mail me with shipping info and we'll work out a price for the pylon.
 ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique |
Posted By: Nautique Mike
Date Posted: June-26-2006 at 5:48pm
|
What do you want for the oval teleflex helm?
Thanks, NM ------------- Nautique Mike |
Posted By: 73skier
Date Posted: June-26-2006 at 10:51pm
| do you have a raw water pump. i know you listed what you have but you seem to know everything so if you don't have one mabe you know where there is one thanks |
Posted By: 79nautique
Date Posted: June-28-2006 at 10:56am
|
Mike I'm sorry I'm not going to be selling the helm now. With the way we are going to mount the boat on the wall the wheel is going to show so we need it still. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique |
Posted By: MaddMarxx
Date Posted: July-05-2006 at 3:48pm
|
My buddy is driving his kids around in a 76 that hardly steers.I want to find him a helm and cable can you help us
maddmarxx@aol.com |
Posted By: 79nautique
Date Posted: July-05-2006 at 3:53pm
|
I can help with a cable and clamp block and the tube but the helm I'm going to keep now. Send me a shipping address and offer for the parts. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique |
Posted By: MaddMarxx
Date Posted: July-05-2006 at 8:49pm
| Hi 79 i dont know for sure what all he needs the cable yes the rest im not sure. what do you think |
Posted By: stang72
Date Posted: July-18-2006 at 10:43pm
|
Chris....do you still have the temp gauge? Teleflex?
If so how much? Thanks Gary ------------- stang Face plants are not that funny when it's you face! http://www.correctcraftfan.com/diaries/images/3720/photo1.jpg" rel="nofollow - The Super Air |
Posted By: DrCC
Date Posted: July-19-2006 at 1:11am
| I've got two helms. |
Posted By: Nautique Mike
Date Posted: July-19-2006 at 9:25am
|
Do you have an oil pressure gauge, horn switch and cig. lighter? If so how much?
Thanks, NM ------------- Nautique Mike |
Posted By: 79nautique
Date Posted: July-19-2006 at 11:54am
|
I've got all of those gauges but I might use them on mine and I still need something to fill the holes for the wall decoration. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique |
Posted By: stang72
Date Posted: July-19-2006 at 12:01pm
|
If it's just a hole filler....you can have the after market one I am replacing(fits same size hole)!
I want to see some pics when you put that thing in your house! ------------- stang Face plants are not that funny when it's you face! http://www.correctcraftfan.com/diaries/images/3720/photo1.jpg" rel="nofollow - The Super Air |
Posted By: 79nautique
Date Posted: July-19-2006 at 12:05pm
|
it's going in my friends barn and that would be doable you sending the old gauge back. It will be a little while before I'll be able to remove the gauge, I have to catch her home on the week-end and right now it's pretty tought because she usually goes to her slip on lake cumberland on the week-ends. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique |
Posted By: stang72
Date Posted: July-19-2006 at 12:20pm
|
No hurry....thanks man! ------------- stang Face plants are not that funny when it's you face! http://www.correctcraftfan.com/diaries/images/3720/photo1.jpg" rel="nofollow - The Super Air |
Posted By: Nautique Mike
Date Posted: July-19-2006 at 1:43pm
|
I'd like to offer the same type of thing. I have an original Oil pressure gauge off my 78' SN that I can trade you + some cash for your trouble. Mine looks fine but does not work.
Thanks NM ------------- Nautique Mike |
Posted By: 79nautique
Date Posted: July-19-2006 at 2:15pm
|
that's fine I'll get back with both of you when I get the guages pulled and get the mailing info then. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique |
Posted By: Nautique Mike
Date Posted: July-19-2006 at 6:13pm
|
My motor and I thank you. Just let me know what you need on my end.
Thanks, NM ------------- Nautique Mike |
Posted By: advsouthwind
Date Posted: July-26-2006 at 1:10am
|
LOOKING FOR 1 FIBERGLASS MUFFLER, IF AVAIL HOW MANY $ THANKS ANDY ------------- gave up sea ray life for a 77 southwind 20 project just livin the dream |
Posted By: chrispilot
Date Posted: July-26-2006 at 1:27pm
|
I have an 80 Nautique and am looking for the black plastic bracket that holds the side vent window in the open and closed position. I have the window, I just need the hardware. Chris ------------- chris |
Posted By: 79nautique
Date Posted: July-26-2006 at 10:50pm
|
I've got the mufflers and I have one side vent piece. Do you need the hinge or just the lock or both, glass? ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique |
Posted By: stang72
Date Posted: July-26-2006 at 11:30pm
|
Chris,
Shoot me an email & include your email address.... lisaandgary@innsightbb.com My buddy Brian (who you met a GL)...wanted to email you and pass on some info. He tried my 540 prop and ended up with it staying on his boat(he got me another already!). He really liked the prop, but saw the RPMS go higher than he likes. He spoke with AMCE and they are going to tune it for his high performance engine...change the cup and bring down the RPMS...said it would perform even better and keep the RMPS in a safer range. Brian thought that the way your boat performs could could benefit too.... you might want to contact them. Anyway...I can give him your email...so he can tell you what they were recommending! Gary ------------- stang Face plants are not that funny when it's you face! http://www.correctcraftfan.com/diaries/images/3720/photo1.jpg" rel="nofollow - The Super Air |
Posted By: advsouthwind
Date Posted: July-26-2006 at 11:54pm
|
are the dimesions 3 x 40 on the muffler if so could you nda it on thursday i want to use the boat this weekend. if this is to short of notice ill understand and just order a new one thanks for your time andy 6126853692 champlin mn ------------- gave up sea ray life for a 77 southwind 20 project just livin the dream |
Posted By: Nautique Mike
Date Posted: July-27-2006 at 9:52am
|
Hey Chris,
Any news on the gauges yet? Was wondering if we might do the same swap for the AMP guage as well as the Oil Pressure. I think it is on the blink as well. Thanks alot- NM ------------- Nautique Mike |
Posted By: 79nautique
Date Posted: July-27-2006 at 10:41am
|
I'm hoping to get the gauges out this week-end or during the week at the lates. The mufflers are the orginal ones and I cann't get them in the mail today. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique |
Posted By: chrispilot
Date Posted: July-27-2006 at 1:06pm
|
I just need the lock for the side window. I have the glass. Chris ------------- chris |
Posted By: surfri
Date Posted: July-30-2006 at 10:30pm
|
do you still have the wiring harness
|
Posted By: stang72
Date Posted: July-31-2006 at 8:04pm
|
Chris,
Do you have the round floor access cover...where you get to the shaft packing? ------------- stang Face plants are not that funny when it's you face! http://www.correctcraftfan.com/diaries/images/3720/photo1.jpg" rel="nofollow - The Super Air |
Posted By: chrispilot
Date Posted: August-19-2006 at 10:10pm
|
Ihad e-mailed you some time ago about the window pieces. My e-mail is chrispilot@yahoo.com if you still have them. I have an 80 Nautique and I need the hardware for the left window. I have the window and the hinge piece. Chris ------------- chris |
Posted By: 79nautique
Date Posted: August-21-2006 at 9:56am
|
I've got the stuff just didn't get around to getting them removed before I left for St. Pete I'll be back up there in Oct. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique |
Posted By: Fishtique20
Date Posted: August-29-2006 at 11:41am
|
Do you still have the mufflers? I am looking for a pair, 3" dia.
Thanks - CLF ------------- Fishtique20 |
Posted By: 79nautique
Date Posted: August-30-2006 at 10:07am
|
I have some, I'll be in Anderson next week and plan on getting everything taken out for everyone that has asked for stuff, got to make some cash to pay for my heads that just got finished. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique |
Posted By: stang72
Date Posted: August-30-2006 at 10:09am
|
Chris...how about the round floor access cover? ------------- stang Face plants are not that funny when it's you face! http://www.correctcraftfan.com/diaries/images/3720/photo1.jpg" rel="nofollow - The Super Air |
Posted By: 79nautique
Date Posted: August-30-2006 at 11:11am
|
I've got one that I was going to use on mine up front that is brand new from skidim but not sure if I want to get rid of it and I don't think that I have one on the other boat I'll have to look and let you know next week. Still need the gauge ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique |
Posted By: stang72
Date Posted: August-30-2006 at 12:49pm
|
Chris...I just found one an ebay and bought it! No worry on that one...thanks! ------------- stang Face plants are not that funny when it's you face! http://www.correctcraftfan.com/diaries/images/3720/photo1.jpg" rel="nofollow - The Super Air |
Posted By: Nautique Mike
Date Posted: August-30-2006 at 8:45pm
|
Hey 79-
Just wondering if you were able to pull the gauges off that display boat. I would still like to trade (my non-working for yours)/ pay for them. Looking for AMP meter/ Tachmeter and any others that might be in better shape than mine. Thanks- NM ------------- Nautique Mike |
Posted By: stang72
Date Posted: August-30-2006 at 9:07pm
|
Yes on the temp gauge. ------------- stang Face plants are not that funny when it's you face! http://www.correctcraftfan.com/diaries/images/3720/photo1.jpg" rel="nofollow - The Super Air |
Posted By: Fishtique20
Date Posted: August-31-2006 at 2:32pm
|
Regarding the mufflers - let me know what they are like when you get back (condition / age / picture ?) my Email is Cfarschon@comcast.net
Thanks a bunch! ------------- Fishtique20 |
Posted By: 79nautique
Date Posted: September-01-2006 at 1:08am
|
I'll get everything pulled and take some pictures and repost the list of parts I have for sale.
all guages are spoken for already I believe and I don't think I'm going to need the nonfunctioning ones sent back like talk about earlier. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique |
Posted By: 79nautique
Date Posted: September-12-2006 at 10:39am
|
Here's what I have, I need to clean them up and take pictures still but this is what I brought back.
guages: temp, tach, hourmeter, ampmeter and oil Wing vent complete with gla$$ and frame plus an additional arm from the other side orginal blue mufflers wiring harness complete from engine block connector to dash gauges. toggle switches and fuse holders ignition switch (key) shift cables, engine and tranny steering cable clamp block tiller arm small access cover plate ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique |
Posted By: Nautique Mike
Date Posted: September-13-2006 at 7:52am
|
Hey 79-
I am interested in all the guages and the toggle switches. How much to ship to NH? Thanks- NM ------------- Nautique Mike |
Posted By: Nautique Mike
Date Posted: September-13-2006 at 10:37am
|
79'-
I would also like the ignition switch as well. Thanks- NM ------------- Nautique Mike |
Posted By: 79nautique
Date Posted: September-13-2006 at 1:40pm
|
Mike what's your zip code so I can firgure what shipping is going to be. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique |
Posted By: stang72
Date Posted: September-13-2006 at 6:58pm
|
Chris...remember, I need the temp gauge! Zip for me is 62526.
Thanks GH ------------- stang Face plants are not that funny when it's you face! http://www.correctcraftfan.com/diaries/images/3720/photo1.jpg" rel="nofollow - The Super Air |
Posted By: 79nautique
Date Posted: September-13-2006 at 7:14pm
|
gary you did pick-up the cover plate on e-bay right? ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique |
Posted By: stang72
Date Posted: September-13-2006 at 8:14pm
|
Yep...got the plate. However, if you have one you are not using, I could use another! I want all my rides with access to the packing nuts on the shaft seal! ------------- stang Face plants are not that funny when it's you face! http://www.correctcraftfan.com/diaries/images/3720/photo1.jpg" rel="nofollow - The Super Air |
Posted By: 79nautique
Date Posted: September-13-2006 at 8:49pm
|
this one is on the smaller size and might be a little tight. Have you thought about drippless seals over the stuffing box? ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique |
Posted By: stang72
Date Posted: September-13-2006 at 10:43pm
|
Dripless...I suppose at some point! Whats the diameter?
Chris, I know Fishtique was interested in the mufflers...if he does not take them I may. ------------- stang Face plants are not that funny when it's you face! http://www.correctcraftfan.com/diaries/images/3720/photo1.jpg" rel="nofollow - The Super Air |
Posted By: Nautique Mike
Date Posted: September-14-2006 at 7:53am
|
Hey 79'-
My zip is 03233. GH, I didn't mean to grab your temp guage. Obviously you had dibs- that's cool. Thanks- NM ------------- Nautique Mike |
Posted By: 79nautique
Date Posted: September-15-2006 at 3:19pm
|
started a new post with pictures ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique |
Posted By: 79nautique
Date Posted: September-18-2006 at 12:44pm
|
mike I've posted pictures of everthing on a new posting do you want all of the switches? ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique |
Posted By: Nautique Mike
Date Posted: September-20-2006 at 7:48pm
|
Hey 79'-
Yes. I would like all the switches if available. Did this year model have a little alumn. ring that told what switch it is? I would like those as well if you have them. Thanks- NM ------------- Nautique Mike |
Posted By: 79nautique
Date Posted: September-20-2006 at 8:55pm
|
they did, I tried to get them off but they where glued or stuck to the dash and all I managed to do is scratch them up. I wanted them for mine but I wasn't able to get them off. E-mail me at rcbroshar@yahoo.com and we can talk about price. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique |
Posted By: snapperscrapper
Date Posted: September-23-2006 at 6:44pm
|
I am interested in the mufflers you have. Can you give me the dimensions thanks. Jason ------------- snapperscrapper |
Posted By: 79nautique
Date Posted: September-25-2006 at 6:36pm
|
jason they are for 3" hose and are 40" overall about 35" from hose to hose. E-mail me at rcbroshar@yahoo.com ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique |
Posted By: TRebhan
Date Posted: September-26-2006 at 10:07am
|
Hey 79,
Do you still have the wing window? You haven't replied to my emails. I thought you would let me know if my offer was enough after you asked me if I would increase it, which I did. Let me know I would still like to buy it! ------------- VT. Nautique |
Posted By: 79nautique
Date Posted: September-26-2006 at 10:26am
|
you where out bid and the other guy did inquire first before everyone else so I'm sending it to him. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique |
Posted By: Caos56
Date Posted: September-27-2006 at 9:56pm
|
can u e-mail me a pic of the cradles.
plz, im interested. thx ------------- Billy O'Bryan |
Posted By: 79nautique
Date Posted: September-27-2006 at 11:40pm
|
I can do that next week when I'm back In Indiana for a week and a half. It looks like a big squared off horse shoe. Angle channell down the sides that sit on the stringers and mount horizontally thru the stringers, motor and tranny mounts on top, open on the back end and double boxed on the front where it goes under the deck and clamps around the ski pylon. Where are you located and what is your e-mail adress? ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique |
Posted By: Caos56
Date Posted: September-28-2006 at 12:14pm
|
Sounds exactly like the ones im looking for.
Are u interested in selling the side logo's as well? Thx Im located in WPB. Xpelled@bellsouth.net ------------- Billy O'Bryan |
Posted By: 79nautique
Date Posted: September-28-2006 at 12:22pm
|
WTF is WPB west palm beach?
the logo's are gone sorry. So if I'm right your in FL somewhere right? because the shipping is going to be an issue I think trying to use UPS or FedX so we would have to meet and exchange which would be much easier. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique |
Posted By: Caos56
Date Posted: September-28-2006 at 6:16pm
|
Yes West Palm Beach.
and wheres it comin from? ------------- Billy O'Bryan |
Posted By: 79nautique
Date Posted: September-29-2006 at 8:43am
|
Tampa. I am driveing up to indiana at the begining of the week and well be back around the 16 or 17. I'll take some picutes and e-mail it next week and we can go from there. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique |
Posted By: 79nautique
Date Posted: October-08-2006 at 9:53pm
|
billy did you get the e-mail I sent? ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique |
Posted By: stang72
Date Posted: October-08-2006 at 10:44pm
Chris...got the gauge last week! Thanks man!
Positive feedback left here! ------------- stang Face plants are not that funny when it's you face! http://www.correctcraftfan.com/diaries/images/3720/photo1.jpg" rel="nofollow - The Super Air |
Posted By: 79nautique
Date Posted: October-13-2006 at 8:41am
|
Caos56 if I don't hear from you pretty quick I'm going to sell the cradle to the scrape yard today. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique |
Posted By: Caos56
Date Posted: October-17-2006 at 11:29am
|
sorry i had an internet problem,
and a busy week at work. Thanks any way ------------- Billy O'Bryan |
Posted By: snapperscrapper
Date Posted: October-23-2006 at 11:54am
|
I may be interested in the mufflers if they are in good shape. I need 3in. ------------- snapperscrapper |
Posted By: 79nautique
Date Posted: October-23-2006 at 2:58pm
|
they are gone already
------------- http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique |
Posted By: dans
Date Posted: October-28-2006 at 4:49pm
|
Chris,Got any fenders for a 82 cc trailer?Know anyone? Thanks ! Dan ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1404&sort=&pagenum=1&yrstart=1981&yrend=198582 - 82 2001 |