OJ or ACME RH prop
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=39421
Printed Date: November-16-2024 at 5:55pm
Topic: OJ or ACME RH prop
Posted By: Mustang17Orange
Subject: OJ or ACME RH prop
Date Posted: July-21-2016 at 7:45pm
|
Does any one have a used prop for sale? It's going on my 79' cc Mustang 17. Desperately need one!!!!
|
Replies:
Posted By: TRBenj
Date Posted: July-21-2016 at 8:44pm
|
The props you list aren't right for your boat. You want a 12" diam. Also, any CNC prop from acme/Oj acts a little bigger... Something like the 1210 acme (12.5x12) would work well for a 302 powered boat. 12x13 or 12x14 hand finished oj 3-blade would be a lower cost option. 12x14 federal would have been original.
|
Posted By: 8122pbrainard
Date Posted: July-21-2016 at 9:53pm
Adam,
Tim is the sites prop expert so stick with his recommendations. What happened to your old prop?
-------------
/diaries/details.asp?ID=1622" rel="nofollow -
54 Atom
/diaries/details.asp?ID=2179" rel="nofollow - 77 Tique
64 X55 Dunphy
Keep it original, Pete
<
|
Posted By: Mustang17Orange
Date Posted: July-21-2016 at 10:34pm
|
It was damaged when I bought the boat. It's bent and chipped really bad.
|
Posted By: Mustang17Orange
Date Posted: July-21-2016 at 10:54pm
|
Thanks Tim! I've never owned a boat before, so I'm new to everything. I appreciate your help. I am looking for either of your recommendations. Do you know anybody that has any used props that you described?
|
Posted By: DayTony
Date Posted: July-22-2016 at 7:48am
your going to want to read through some of these FAQ threads in this link the first two especially before you bolt up a new propeller and be on your way.
http://www.correctcraftfan.com/forum/forum_posts.asp?TID=27356&title=ccf-faq" rel="nofollow - FAQ LIST
-------------
1988 Barefoot nautique-454
|
Posted By: Little one
Date Posted: July-22-2016 at 3:46pm
Is an acme 1214(12 1/2"x13)
too much prop for a 302 powered boat
|
Posted By: TRBenj
Date Posted: July-22-2016 at 8:03pm
Posted By: ScottZ
Date Posted: July-31-2016 at 9:33am
I think I have a 12 x 14 federal I can sell. I will check.
-------------
Scott Zuelzke
Lake Mitchell , AL
1984 Ski Nautique
1972 Skier
|
Posted By: Donald80SN
Date Posted: July-31-2016 at 11:50am
His diary post states the boat has a 351. Maybe it does have a 302. He may need to confirm this engine size first.
-------------
1980 Ski Nautique SOLD Back to Cypress Gardens
2002 Sport Nautique, GT-40, FCT2, Cover Sports, Tower Bimini, Inc., Wet Sounds Audio System, Star Gazer Wake Edition S.
1968 Ski Nautique, Project.
|
Posted By: ScottZ
Date Posted: August-02-2016 at 9:34am
It is a 12x15.
-------------
Scott Zuelzke
Lake Mitchell , AL
1984 Ski Nautique
1972 Skier
|
|