Need shaft prop and shaft support 96 Nautique
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=39510
Printed Date: September-27-2024 at 6:00pm
Topic: Need shaft prop and shaft support 96 Nautique
Posted By: sterlingmermaid
Subject: Need shaft prop and shaft support 96 Nautique
Date Posted: July-28-2016 at 3:25pm
|
Hi everyone I need a 1x51 shaft prop and shaft support Please call 864-266-4884 ------------- tk |
Replies:
Posted By: Dreaming
Date Posted: July-29-2016 at 1:32pm
| these are most likely parts that would be best obtained new, Since you are looking at a new shaft, the ARE double taper is well respected around here and not a big cost upgrade. the trouble with used shafts is that it's hard to tell if they are straight... you might find one, but you're looking for a part that is often damaged by an on water (or trailer) incident |
Posted By: 8122pbrainard
Date Posted: July-30-2016 at 8:10am
|
Terrence, I'd also suggest the ARE shaft system. They are about the same price and the big advantage is the R&R. Having a taper on both ends saves the hassle of fitting the heat shrunk interference fit coupling on the trans end. Regarding the "shaft support", I assume you are referring to the strut. If you still have the strut, have you thought about straightening it? Many have been straightened successfully. Some have done it themselves with a hydraulic press and others have had prop shops straighten them. Also, it would be very helpful if you listed what boat these are going on!!!  ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: sterlingmermaid
Date Posted: July-30-2016 at 10:12am
|
Thanks I will look into that I already ordered the strut and shaft from planet Nautique but the shaft is on back order Where is the best place to buy the double tapered shaft ------------- tk |
Posted By: 8122pbrainard
Date Posted: July-30-2016 at 10:30am
|
http://www.skidim.com/Drive-Shafts/products/1160/" rel="nofollow - The ARE system is made by one company and here's the best place for pricing. ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |