Print Page | Close Window

'97 Skeg Removal Printed From: CorrectCraftFan.com Category: General Correct Craft Discussion Forum Name: Common Questions Forum Discription: Visit here first for common questions regarding your Correct Craft URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=40095 Printed Date: November-21-2024 at 3:05pm Topic: '97 Skeg Removal Posted By: 86ER Subject: '97 Skeg Removal Date Posted: October-19-2016 at 11:27pm Can you remove a skeg without having to access the nuts inside the hull? For instance, did Correct Craft use nut plates for the skegs so you don't have to worry about the nuts inside the hull spinning or moving out of place when unscrewing the bolts? Replies: Posted By: TRBenj Date Posted: October-19-2016 at 11:44pm No plates, no nuts on that era boat. Just screws. Cc smartened up and decided a fin strike shouldn't result in massive holes in the hull. Posted By: 86ER Date Posted: October-20-2016 at 12:06am Even better. Thanks for the info and quick response.

Print Page | Close Window