318 poly parts
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=40228
Printed Date: November-16-2024 at 3:44pm
Topic: 318 poly parts
Posted By: Got Tiques
Subject: 318 poly parts
Date Posted: November-25-2016 at 12:15pm
Looking for some help on a 65 Barracuda and 318 Poly rebuild. Please look in your scrap piles for cooling system parts including the first hard part downstream of the thru-hull fitting on the cooling water inlet. It's a cast iron Y with a fourth connection heading to port. It was used on dual impeller pumps on older Chryslers. Also any rear deck cleats that have a tear drop shaped bottom. Also missing side frames for the two-piece windshield.
Dan Monahan and Bruce, please check your stash. Thanks, Todd
-------------
http://correctcraftfan.com/diaries/details.asp?ID=4811" rel="nofollow - '78 Ski Tique
|
Replies:
Posted By: ScottZ
Date Posted: November-26-2016 at 11:05am
Hey Todd,
Shot me a pic of the engine parts if possible to inboards@bellsouth.net. I have a complete Polly less water jackets that I will part out.
Scott
-------------
Scott Zuelzke
Lake Mitchell , AL
1984 Ski Nautique
1972 Skier
|
Posted By: Got Tiques
Date Posted: November-26-2016 at 2:58pm
Scott, Thanks! PM email or cell and I'll fwd some pics.
-------------
http://correctcraftfan.com/diaries/details.asp?ID=4811" rel="nofollow - '78 Ski Tique
|
Posted By: Got Tiques
Date Posted: November-26-2016 at 2:59pm
Inboards@bellsouth.net😌
-------------
http://correctcraftfan.com/diaries/details.asp?ID=4811" rel="nofollow - '78 Ski Tique
|
Posted By: 93/70 ccpb
Date Posted: November-26-2016 at 4:52pm
ill check todd,no cleats or windshield end parts.
-------------
what you dont want to hear from jbear and bill.you cant get in the boat till you get your minute,and they throw you back in water!
|
|