Airguides: 60's through 80's
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=40252
Printed Date: November-27-2024 at 5:23am
Topic: Airguides: 60's through 80's
Posted By: TRBenj
Subject: Airguides: 60's through 80's
Date Posted: November-30-2016 at 5:48pm
Winter is here and I have finally gotten to some Airguide work that has been on the back burner for a while. I have several gauges (mostly pairs) that I have gone through and are ready to install. All have received full functional restoration (bench tested) and moderate cosmetic restoration. That is to say that the cost prohibitive parts to restore (namely the chrome housing) are not factory fresh- but I have done my best to make them presentable. I have additional parts to assemble or repair a few more. I am always looking for good cores. Pricing on the ones shown below will be in the $90-150 range. Email: TRBenj@gmail.com
|
Replies:
Posted By: velde99
Date Posted: November-30-2016 at 6:27pm
| Wow! Almost as bad as me with 2025's! |
Posted By: seacamper
Date Posted: December-01-2016 at 12:55am
|
Hey Tim, I should have sent you the speedos with the other stuff. I have two cores if you want them. Pretty bad shape, but you are the guy to use them. Tom ------------- 1980 Ski Nautique Boat Bar 1988 Mastercraft Tristar Open Bow 1988 Mastercraft Tristar Closed Bow 1969 Seacamper Houseboat 1986 Harris Pontoon 2004 Seadoo GTX SC + Flydive Xboard 1999 Adventurecraft |
Posted By: ScottZ
Date Posted: December-01-2016 at 12:01pm
|
Tim, I have 2 or 3 cores as well. I will dig them up and get back to you. ------------- Scott Zuelzke Lake Mitchell , AL 1984 Ski Nautique 1972 Skier |
Posted By: Frankenotter
Date Posted: December-02-2016 at 10:57am
|
That's pretty man jewelry. Are the internals the same through the years? ------------- 1999 Ski Nautique 196 |
Posted By: TRBenj
Date Posted: December-02-2016 at 12:02pm
| Yes and no... Some parts/design elements stayed common throughout the years but others changed significantly, as did the construction geometry. I have found it helps to have a lot of spare parts when restoring/rebuilding these. |
Posted By: Riley
Date Posted: December-02-2016 at 1:41pm
| Are those gauges press fit into the bezals? |
Posted By: 8122pbrainard
Date Posted: December-02-2016 at 2:41pm
|
Bruce, The guts in the surface mounted 60's - 70's screw in from the back. ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: Riley
Date Posted: December-02-2016 at 2:52pm
| Too, bad. I was hoping Tim had special skills for restoring press fit gauges. |
Posted By: DrCC
Date Posted: December-02-2016 at 4:39pm
|
Do the white KPH still sync in the back or were they converted to thru-lens syncs ? ------------- Keep it....from sinkin' |
Posted By: TRBenj
Date Posted: January-04-2017 at 3:44pm
|
Bump for the new year... Need to make room for more projects on my dining room table so these will start to be listed on eBay in the coming weeks. Please inquire if you need anything! Trbenj@gmail.com Al, not sure how I missed your question- the 2 white faced gauges shown have front adjustment knobs (allen key). I may have the ability to make a few of the original rear adjustment style, but parts for those are running a little low. |
Posted By: TRBenj
Date Posted: February-17-2017 at 1:27pm
| Bump again... these are going to Ebay shortly- better deals to CCF members before they're listed! Email if interested: TRBenj@gmail.com |
Posted By: ncdoubleup
Date Posted: February-17-2017 at 9:04pm
| Hey there, I'm interested in 2 of the speedos on the far right column. I'm sending you an email. |
Posted By: velde99
Date Posted: February-18-2017 at 10:21am
| I sent two emails with no response. Guess my money isn't green enough or he's still pissed I made a mistake. 🤑 |
Posted By: TRBenj
Date Posted: March-01-2017 at 1:23pm
I am down to 2 pairs of the black face (chrome housing) 725's, and a single cc face (plastic body) 2025. I have a few more I could assemble in a few different ways but we are quickly approaching the end of my speedometer season (i.e., winter). Please inquire if you need any of these, the remainder will be cycled to eBay in the coming weeks. Better deals for CCFans though!TRBenj@gmail.com |
Posted By: TRBenj
Date Posted: April-29-2017 at 12:00pm
|
Just one correct craft face plastic 2025 left. The rest of my assembled Airguides have been sold... still plenty of parts/cores remaining so please inquire with any needs. I will most likely assemble a few more come winter! Trbenj@gmail.com |