Looking for original CC trailer
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=40427
Printed Date: November-27-2024 at 5:48am
Topic: Looking for original CC trailer
Posted By: Jacob24
Subject: Looking for original CC trailer
Date Posted: January-18-2017 at 4:14pm
|
Hello I'm Jacob from Belgium and I am looking for an original cc trailer for my '82 SN 2001. Unfortunately I can't find any for sale here in Europe, and that's why I'm looking to buy one in the US. Right now my boat lays on a trailer with bunks that are about 20 cm higher than they are one the original trailer. The problem with that is that you have to drive much deeper onto the slibway, which isn't possible because we pull the boat with a mercedes van, which has back wheel drive. And the slibway is slick as f**k. This means that everytime I launch the boat, I have to give almost full throttle to get my boat off, with a cold engine. I hope that someone can help me. Thank you and greetings Jacob |
Replies:
Posted By: Mojo
Date Posted: January-18-2017 at 5:03pm
|
Hey Kristof,,,,, You're up.....!!!!! ------------- 05' SV211 TE 73' Martinique had:96' SNOB had:76' Nautique had 77 Tique |
Posted By: Fl Inboards
Date Posted: January-18-2017 at 5:38pm
|
I have one that I will sell, Out from under my 83 As it is going to become a Bar! However for the cost of purchasing this one and shipping to Belgium I would think that you could have a pretty close replica built locally. Any way It is all here and complete except for guide poles and will need a paint job. I can quote you as is or restored. ------------- Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise. 1993 Shamrock "fat" 20. 2008 Nautique 196 5.0 |
Posted By: Jacob24
Date Posted: January-19-2017 at 8:34am
| Thanks for your reply. Do you have an idea of what iT would cost to ship iT over. And do you have pictures of your trailer? |
Posted By: Mojo
Date Posted: January-19-2017 at 10:19am
|
Jacob, I was hoping for Kristof, another Belgium member to chime in. If I remember right, a stock CC trailer doesn't abide by your local mandates for what a trailer has to be to pass code. Might want to make sure you look into that before you start importing or making trailers.. Of all the pictures I've seen of Correct Crafts in Europe, non of them have factory built trailers under them.. ------------- 05' SV211 TE 73' Martinique had:96' SNOB had:76' Nautique had 77 Tique |
Posted By: 8122pbrainard
Date Posted: January-19-2017 at 11:19am
Jacob, I remember the same. Kristof's trailer is plenty different that the ones over here! ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Mojo wrote:Posted By: Jacob24
Date Posted: January-19-2017 at 12:11pm
| Thank you for that information, this was something I didn't think off. I also know that Kristoff is from around where I live, so I'll try to contact him and see if he can help. |
Posted By: 8122pbrainard
Date Posted: January-19-2017 at 12:47pm
http://www.correctcraftfan.com/forum/member_profile.asp?PF=3685" rel="nofollow - Here's Kristof's profile out of the member list. Try to email or PM him. He may still be on duty but does check in with us when he can. ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |