'82 2001 lift ring
Printed From: CorrectCraftFan.com
Category: CorrectCraftFan.com
Forum Name: New
Forum Discription: What's new at CorrectCraftFan.com
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=40563
Printed Date: December-27-2024 at 1:33pm
Topic: '82 2001 lift ring
Posted By: LongLakeWI
Subject: '82 2001 lift ring
Date Posted: February-16-2017 at 10:57pm
|
Last summer I bought my first boat ever a 1982 2001. I am also curious about replacing the rear lifting ring with a pop-up ski pylon (See link below) is this feasible? Good idea or bad idea? Mostly for when I have to pull tubers 😤 Appreciate the feedback and ideas! https://www.whitecapindustries.net/products/push-up-ski-pylon-6959 |
Replies:
Posted By: Gary S
Date Posted: February-16-2017 at 11:22pm
Without permanent removal of the gas tank I don't think you'll have 6" of the required clearance you'd need. That said,even if you did you'd have to figure out how to reinforce the deck, When they moved the pylon on the v drive boats from the traditional place to between the back seat and the engine there was a aluminum frame work connecting it to the engine cradle too. There is a spool in the very back,that you can see in this pic, but I think the decal says it's just for skiers ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS 95 Nautique Super Sport |
Posted By: quinner
Date Posted: February-17-2017 at 9:45am
|
A work around for your situation is run the rope thru the lift ring to the pylon. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=1143" rel="nofollow - Mi Bowt |