Throttle Lever Lockout Ring not Working
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=41132
Printed Date: November-16-2024 at 5:49am
Topic: Throttle Lever Lockout Ring not Working
Posted By: bpurnell
Subject: Throttle Lever Lockout Ring not Working
Date Posted: May-27-2017 at 3:28pm
I have a 1991 Ski Nautique and the lockout ring on the throttle lever is not functional; that is the lever passes from forward to reverse without locking in the neutral position. The spring seems fine so I imagine there is a worn part somewhere inside. Anyone had any experience with this, and is it possible to fix?
Brian in Alberta, Canada
|
Replies:
Posted By: SNobsessed
Date Posted: May-27-2017 at 3:30pm
Very common issue.
I tried to fix it with a heavier spring, to no avail.
I bought a replacement lever, that was at least 6 years ago.
It was hard to find back then.
Search for MV2 lever, maybe you will get lucky.
It is just held on by a set screw underneath.
-------------
“Beer is proof that God loves us and wants us to be happy.”
Ben Franklin
|
Posted By: Gary S
Date Posted: May-27-2017 at 3:43pm
Is the plastic lock pawl wearing out?
-------------
http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS
95 Nautique Super Sport
|
Posted By: bpurnell
Date Posted: May-27-2017 at 5:16pm
Thanks for the replies!
Not sure about the lock pawl. I will have to take it apart. If it is worn out is it possible to get a new one?
|
Posted By: SNobsessed
Date Posted: May-27-2017 at 7:24pm
Search internet for MV2 lever.
-------------
“Beer is proof that God loves us and wants us to be happy.”
Ben Franklin
|
|