76 Nautique for sale [disassembled]
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=41163
Printed Date: November-23-2024 at 8:23am
Topic: 76 Nautique for sale [disassembled]
Posted By: jimrogers74
Subject: 76 Nautique for sale [disassembled]
Date Posted: June-02-2017 at 12:45pm
Anybody looking to make a project out of a disassembled 76 Nautique?
I took apart a few years ago, and then got ripped off by the guy who was supposed to update my stringers and floor. Haven't had the appetite to begin again, and don't have the locale to embark on the fiberglass/stringer work myself.
The motor was good when i took apart, as well as the seats. [gray]
The floors and stringers need redone. along with the necessary fiberglass work.
Needs carpet, wiring, and could likely use updated gauges.
The boat is sitting in Warsaw, IN. Completely stripped down.
I can send pics as requested.
Please feel free to ping me w/ your thoughts.
thank you,
-------------
jimrogers74
|
Replies:
Posted By: skutsch
Date Posted: June-02-2017 at 1:03pm
Pictures?
-------------
Our http://www.correctcraftfan.com/diaries/details.asp?ID=4669" rel="nofollow - 98 Sport Nautique
My Dad's 63 Ski N
|
Posted By: phatsat67
Date Posted: June-02-2017 at 3:47pm
|
Jim, our lake house is in Warsaw so I am there regularly. I would be interested in checking it out. Give me a call if you'd like. 765-527-7614
|
Posted By: HawRiver77
Date Posted: June-16-2017 at 5:46pm
I need a complete set of seats, and the flame/spark arrestor, ( air filter assembly) for a 351 w.
-------------
RBC
|
Posted By: butchie
Date Posted: October-04-2017 at 9:43pm
|
Hey will you sell me some parts, I need the tow pylon,forward bottom fin, and port side angle part of windsheiled
|
Posted By: jimrogers74
Date Posted: October-05-2017 at 3:44pm
I am so sorry, Somehow my updates have stopped, and I've not watched for replies. FYI, this will probably stay as a complete boat until I'm absolutely sure that won't be putting it back together. Once I sell a part or two, there'll be no going back.
I truthfully don't know what it is worth, but have seen projects in the $2500 range on this site. I'll contact the phone number above, just in case you're still interested.
Thanks for reaching out guys, i'm sorry about such a delay!
-------------
jimrogers74
|
Posted By: jimrogers74
Date Posted: October-05-2017 at 3:57pm
so sorry for not replying sooner,
for now i don't think i'll be parting it out, but i do happen to have a spare pylon.
think i paid $175 for one with the ring on it. i had sawed off mine years ago so i could slip a skylon on for my son, but want to return it to a ringed pylon when i put it together.
if you're still on the market, and would be interested in one with just a knob on top, get back with me at jimrogers74@comcast.net. i could send you pics.
-------------
jimrogers74
|
Posted By: mn 75 sw
Date Posted: October-06-2017 at 9:18pm
Hello, I am wondering if you have an extra ski pylon for your boat and if you are interested in selling it. If so, I would be very interested. Let me know, Kind regards, Scott 612-910-2040
-------------
Scott
612-910-2040
kohlsfive@aol.com
|
Posted By: 8122pbrainard
Date Posted: October-06-2017 at 10:04pm
Scott,
You may not realize it but I feel a pylon for a SN will be too short for a SW since the SW is a deep V high freeboard hull.
-------------
/diaries/details.asp?ID=1622" rel="nofollow -
54 Atom
/diaries/details.asp?ID=2179" rel="nofollow - 77 Tique
64 X55 Dunphy
Keep it original, Pete
<
|
Posted By: butchie
Date Posted: October-07-2017 at 7:03am
|
Hello, I have the pylon that had been cut like you did, Do you want to sell me your pylon ?
|
Posted By: butchie
Date Posted: October-17-2017 at 8:22pm
|
Hello, I would like to buy the ski pylon, For my 75 sn. Thanks Butch Chew. # 410-725-2944
|
|