Print Page | Close Window

V drive damper plate replacement Printed From: CorrectCraftFan.com Category: Repairs and Maintenance Forum Name: Boat Maintenance Forum Discription: Discuss maintenance of your Correct Craft URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=41165 Printed Date: November-16-2024 at 6:02am Topic: V drive damper plate replacement Posted By: Swatkinz Subject: V drive damper plate replacement Date Posted: June-02-2017 at 3:06pm Boat starting make a little "rattle" sound at idle but in gear. Mark Schneider of PCM lives nearby so I had him listen to it and he immediately said that it was the damper plate. Also mentioned that other than the nuisance rattle it won't expedite other component failure. Replaced the damper plate in my last boat, but the vdrive setup is more intimidating. Anyone on here done a DIY damper on a fairly modern vdrive? Thinking I'm going to put up with the noise this summer and then replace the damper in the off season. Any tips or tricks involved with swapping a vdrive damper? ------------- Steve 2011 Sport/Air 200 Excalibur 343 2017 Boatmate Tandem Axle Trailer Former CC owner (77, 80, 95, 88, all SNs) Former Malibu owner (07, 09)

Print Page | Close Window