Fresh water pump pulley for 79 Mustang 17
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts Wanted
Forum Discription: Parts wanted only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=41422
Printed Date: November-16-2024 at 11:50am
Topic: Fresh water pump pulley for 79 Mustang 17
Posted By: KooK
Subject: Fresh water pump pulley for 79 Mustang 17
Date Posted: July-05-2017 at 2:10pm
My fresh water pump pulley is wobbling around and needs to be replaced it seems. It measures with a diameter of 6 and 7/8 inch with a 5/8 inch shaft that is keyed. 
|
Replies:
Posted By: 8122pbrainard
Date Posted: July-05-2017 at 4:58pm
|
Consider welding the sheave back onto it's hub. It may be easier than trying to find a replacement? ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: KooK
Date Posted: July-05-2017 at 7:34pm
| I'll call around and see if anybody can do that or somehow straighten it out. But, I figured it was worth a shot. |
Posted By: 8122pbrainard
Date Posted: July-05-2017 at 7:58pm
|
Aaron, It's a stamped steel sheave so if it still wobbles after it's welded, you can chuck it up on a 5/8 round in the lathe or even a drill press. Then rotating it slowly find the high spot and whack it with a hammer! ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |