Engine Cover gasket
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: General Discussion
Forum Discription: Anything Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=41661
Printed Date: December-02-2024 at 12:26pm
Topic: Engine Cover gasket
Posted By: Zoro957
Subject: Engine Cover gasket
Date Posted: August-02-2017 at 5:00pm
I have a 2010 200 and the rubber gasket around the engine hatch is coming off. I've tried hot melt glue to put it back, but that isn't working. It is almost all the way off now. Any ideas?
-------------
Marty 2010 200
|
Replies:
Posted By: fgroce
Date Posted: August-02-2017 at 5:12pm
Welcome to the forum. Hopefully someone has had your problem before, and will have an idea on how to attach.
-------------
FGroce
88 Ski Nautique
For 28 years
Now 2002 Ski Nautique
|
Posted By: 8122pbrainard
Date Posted: August-02-2017 at 5:41pm
Marty,
I too would like to welcome you to CCfan. Regarding the gasket, I have always for that a solvent based contact adhesive works best on rubber gaskets.
-------------
/diaries/details.asp?ID=1622" rel="nofollow -
54 Atom
/diaries/details.asp?ID=2179" rel="nofollow - 77 Tique
64 X55 Dunphy
Keep it original, Pete
<
|
Posted By: Gary S
Date Posted: August-02-2017 at 6:23pm
3m makes great weatherstrip adhesive
-------------
http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS
95 Nautique Super Sport
|
Posted By: Gary S
Date Posted: August-02-2017 at 6:28pm
3m 847
-------------
http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS
95 Nautique Super Sport
|
|