Holley carb
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=42079
Printed Date: November-21-2024 at 1:52pm
Topic: Holley carb
Posted By: Duane in Indy
Subject: Holley carb
Date Posted: October-25-2017 at 2:44pm
|
I have a surplus carb that I am not needing. I opted for a larger Quick Fuel carb. Has less than 1 hour of test stand time. Holley lists it as 600 cfm model 4160 75009-4 Stamped on air horn. Their book shows it as part # 0-80319-1 Also has inlet gas fitting installed. As with any used carb it may or may not need tweeking. Worked on my stand and then was drained. $300.00 shipped to your door. (they are over $600 new now)      ------------- Keep it as original as YOU want it 1978 Mustang (modified) |
Replies:
Posted By: Got Tiques
Date Posted: October-25-2017 at 4:22pm
|
Duane, interested in the carb. Do you know the CFM, and it ran on your 302? ------------- http://correctcraftfan.com/diaries/details.asp?ID=4811" rel="nofollow - '78 Ski Tique |
Posted By: Got Tiques
Date Posted: October-25-2017 at 4:52pm
|
Sorry Duane, I now see the 600. I’m interested if I’m first in line. Thanks, Todd ------------- http://correctcraftfan.com/diaries/details.asp?ID=4811" rel="nofollow - '78 Ski Tique |
Posted By: Duane in Indy
Date Posted: October-25-2017 at 5:27pm
Yes, you are the first that has expressed interest. And yes, it ran on my stand for less than an hour. My 302 is overbored .060 and highly modified. I opted for the Quick Fuel 700 cfm double pump model. Carburetors are contrary beasts. One small spec of dirt between the needle and seat can cause a leak. Fuel pressure and float level as well as the carb itself being level can affect performance. That is why I stated that it may or may not need tweaking. My new Quick Fuel got a spec of dirt on the needle and needed cleaning when it was new. All said, the carb looks new and is almost new. Also have a factory flame arrestor that I would let go for another $20 if you need it also. PM me ------------- Keep it as original as YOU want it 1978 Mustang (modified) |
Got Tiques wrote:Posted By: Got Tiques
Date Posted: October-26-2017 at 11:00am
|
Duane, PM sent. Can you post pics of the flame arrester. Thanks. ------------- http://correctcraftfan.com/diaries/details.asp?ID=4811" rel="nofollow - '78 Ski Tique |
Posted By: Duane in Indy
Date Posted: October-27-2017 at 11:39am
I have to locate the base yet.   ------------- Keep it as original as YOU want it 1978 Mustang (modified) |
Posted By: Got Tiques
Date Posted: October-28-2017 at 11:45am
|
Duane, PM sent ------------- http://correctcraftfan.com/diaries/details.asp?ID=4811" rel="nofollow - '78 Ski Tique |
Posted By: Duane in Indy
Date Posted: October-29-2017 at 8:35am
|
SOLD, SOLD, SOLD Still have not found the base for the arrester but still looking. Will ship carb out Monday Thank You, Duane  ------------- Keep it as original as YOU want it 1978 Mustang (modified) |