Hose clamps
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: Common Questions
Forum Discription: Visit here first for common questions regarding your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=42116
Printed Date: November-28-2024 at 1:20am
Topic: Hose clamps
Posted By: Orlando76
Subject: Hose clamps
Date Posted: November-06-2017 at 9:04am
|
I am Replacing exhaust hoses. Hesitant to reinstall 41 year old clamps. I know there are good clamps available that are pricey but slightly better, where do you buy them? All I can find locally are made in PRC and I have trouble getting a 1” clamp working, don’t really trust their 3” below the water line. Thanks. ------------- Please support The Cystic Fibrosis Foundation 1976 Ski Nautique 351 Escort 1993 Ski Nautique purple and black 351 HO PCM |
Replies:
Posted By: 8122pbrainard
Date Posted: November-06-2017 at 9:07am
https://www.mcmaster.com/#standard-hose-clamps/=1a4wxqe" rel="nofollow - T bolt type at McMaster  ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: Orlando76
Date Posted: November-06-2017 at 10:08am
|
Thanks Pete. ------------- Please support The Cystic Fibrosis Foundation 1976 Ski Nautique 351 Escort 1993 Ski Nautique purple and black 351 HO PCM |
Posted By: baitkiller
Date Posted: November-06-2017 at 6:44pm
|
Those T bolts will crush your mufflers if you are not very careful. a little over-kill for a run about. AWAB is the industry standard in quality. These will last another 40 years, No worries. Rolled edges and non perforated bands. best worm clamp you can get. Also the only clamp recommend for silicone hose not that it matters. Remember you need two at each connection to meet the standard if that's important to you.  ------------- Jesus was a bare-footer............. |
Posted By: 8122pbrainard
Date Posted: November-06-2017 at 7:52pm
|
[QUOTE=baitkiller] Those T bolts will crush your mufflers if you are not very careful. a little over-kill for a run about. John, As you mentioned, your rolled edge, non perforated best hose clamp you can buy will crush fiberglass mufflers too if you tighten them too much!  ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: Orlando76
Date Posted: November-06-2017 at 8:39pm
|
Thanks for the info but uhhh, real men don’t have mufflers. LPSL. Yes I’m going to double clamp. ------------- Please support The Cystic Fibrosis Foundation 1976 Ski Nautique 351 Escort 1993 Ski Nautique purple and black 351 HO PCM |
Posted By: Orlando76
Date Posted: November-06-2017 at 8:44pm
|
3” hose cost me $80. Hose clamps $155. Wow. ------------- Please support The Cystic Fibrosis Foundation 1976 Ski Nautique 351 Escort 1993 Ski Nautique purple and black 351 HO PCM |
Posted By: baitkiller
Date Posted: November-06-2017 at 9:04pm
|
Give me a shopping list and Ill see what i can do. I have commercial accounts and Cam works at WM and can save 40% or more on stuff like this. If its worthwhile I can stuff them in one of those USPS one price boxes. Part number and count. ------------- Jesus was a bare-footer............. |
Posted By: dgabler
Date Posted: March-08-2018 at 1:46pm
| I think that these are the same? $3/ea at https://www.defender.com/product.jsp?id=3057960 not sure what the differences are with what you picked up. |
Posted By: KENO
Date Posted: March-08-2018 at 2:43pm
Here's a picture of what you linked to and what Baitkiller referred to  One is definitely different and a lot pricier.than the other. Is the T bolt necessary? Only to some people |
8122pbrainard wrote:Posted By: MourningWood
Date Posted: March-13-2018 at 12:08am
|
One can get 10 stainless steel 3" hose T-clamps from Amazon for less than $17. It's a ski boat, not the space shuttle. ------------- 1964 Dunphy X-55 "One 'N Dun" 'I measured twice, cut three times, and it's still too short!" |
Posted By: Jonny Quest
Date Posted: March-13-2018 at 1:14am
|
Wood: I agree with the concept. When doing below-waterline applications, I like to err on the side of caution. That may not be the best place to be putting the cheapest part I can find. Just sayin'... ------------- Current 2003 Ski Nautique 206 Limited Previous 2001 Ski Nautique Open Bow 1994 Ski Nautique Open Bow Aqua skiing, ergo sum |
Posted By: gt40KS
Date Posted: March-13-2018 at 1:14am
|
Hi quality T-bolts are great, and necessary ... for certain things. I have a dozen or more on my truck. But it's a turbo diesel, and they are all related to the turbo system. Pushing tons of air at 25-30 psi, the standard type clamps wouldn't last long. But with the coolant system, the AWAB clamps are just fine. ------------- JCCI 1995 Ski Nautique GT40 |