Parting out 1986 Martinique open bow
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=42204
Printed Date: November-22-2024 at 9:37pm
Topic: Parting out 1986 Martinique open bow
Posted By: waterwrench
Subject: Parting out 1986 Martinique open bow
Date Posted: December-06-2017 at 1:41am
| Customer finally decided to go ahead with parting out this 1986 Martinique. Boat is 100% complete so all parts are available. |
Replies:
Posted By: dwcar
Date Posted: December-07-2017 at 12:14pm
|
prop? ------------- 83Ski |
Posted By: Hollywood
Date Posted: December-07-2017 at 1:51pm
| Cockpit seats? |
Posted By: waterwrench
Date Posted: December-07-2017 at 4:04pm
| Need new skins but the foam and backing are all in good shape. |
Posted By: waterwrench
Date Posted: December-07-2017 at 4:05pm
| Yes I'll have to check on the condition this weekend. |
Posted By: waterwrench
Date Posted: December-12-2017 at 7:41pm
| I have a picture of the cockpit seats if you would like them I can email them to you. Just send me ur e-mail |
Posted By: waterwrench
Date Posted: December-12-2017 at 7:44pm
| Prop is in good shape. |
Posted By: dwcar
Date Posted: December-18-2017 at 2:54pm
|
please email me pictures? dwcar@yahoo.com ------------- 83Ski |
Posted By: captbob626
Date Posted: December-24-2017 at 11:26pm
|
Are you familiar with the steering cable clamp assembly located on the stringer toward the stern? I am in need if you have one. Bob ------------- Bob Meimbresse |
Posted By: Mike the Mechanic
Date Posted: March-07-2018 at 3:11am
| What is the condition of the engine? Need a right hand rotation 351. |
Posted By: Mike the Mechanic
Date Posted: March-07-2018 at 3:30am
| Was the engine running? |
Posted By: waterwrench
Date Posted: March-08-2018 at 2:53pm
| If you go out and run it hard it has a lifter that starts to loose its prime. Gets a lifter tick that comes and goes. I work at a nautique dealership, and guarantee its a good solid engine with low hours6 |
Posted By: Mike the Mechanic
Date Posted: March-08-2018 at 4:26pm
| what is the asking price and can you crate for shipping? |
Posted By: waterwrench
Date Posted: March-09-2018 at 6:45am
| Can crate up engine. Parting out boat for a friend, so have to check on price. |
Posted By: beardo73
Date Posted: March-29-2018 at 1:15pm
|
Hi there. Is there a cover for the boat? Looking for those. Also, what kind of condition is the engine cover in? Please feel free to email me any pictures: derrick@lbh2o.com Thanks! |
Posted By: Conan
Date Posted: April-08-2018 at 9:47pm
|
anything sticking out of the bottom I need. rudder, strut, fins, shaft, prop. And driver side window wing w/ mount. ------------- /diaries/details.asp?ID=4676" rel="nofollow - 1988 Martinique C/B 351 |
Posted By: Conan
Date Posted: April-08-2018 at 9:51pm
|
and dash board push buttons thanks ------------- /diaries/details.asp?ID=4676" rel="nofollow - 1988 Martinique C/B 351 |
Posted By: Duke
Date Posted: April-12-2018 at 2:36pm
| I'm interested in the side running lights and was the windshield's middle window hinged? |
Posted By: waterwrench
Date Posted: April-13-2018 at 11:41am
| Side lights are broke. Yes windshield is hinged. |
Posted By: waterwrench
Date Posted: April-13-2018 at 11:44am
| Sorry it took so long to get back to you engine covers in nice shape but no cover for the boat I can take some pictures this weekend if you'd like |
Posted By: Duke
Date Posted: April-13-2018 at 11:46am
|
Good morning! Thank you for your reply. On the running lights, even if they do not work, are the green or red "caps" intact? How much for the windshield? Can you post pictures? Thank you. |
Posted By: waterwrench
Date Posted: April-13-2018 at 11:47am
| Everything is still on the bottom of the boat strut rotor prop shaft fins I will talk to the owner and get a price |
Posted By: beardo73
Date Posted: April-16-2018 at 11:15am
|
No worries! Would love to see it. I am in need of a new one. Do you happen to know color of it by chance? Thanks again! |
Posted By: Orman
Date Posted: May-11-2018 at 2:06pm
| what is the price on engine? Call me at 319-242-1169 |
Posted By: hayajustin
Date Posted: May-11-2018 at 4:24pm
| I am looking for the rear cushion that fits over the fuel tank. |
Posted By: Rick
Date Posted: May-16-2018 at 3:26pm
|
I'm looking for a set of removable swim platform brackets. both hull and step side.Thanks ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=250&yrstart=1996&yrend=2000%20" rel="nofollow - 2000 Ski |
Posted By: Dawills55
Date Posted: June-20-2018 at 8:00am
| Do you have the Carburetor and exhaust manifolds for sale? |
Posted By: Dawills55
Date Posted: June-20-2018 at 8:34am
|
Please email me and let me know if you still have parts available. willsdrew2@gmail.com Thanks! |
Posted By: keuka1
Date Posted: July-17-2018 at 12:58pm
|
Hi, Do you have any of the wooden cup holders left? Also, I would be interested in some interior pieces, dash, gauges, etc. if they are still available. Thank you |
Posted By: waterwrench
Date Posted: July-24-2018 at 1:53am
| Yes they are for sale. Parting out the boat for a friend. Will check on price. All parts are in good shape. Sorry for the delayed response. |
Posted By: Maxdog154
Date Posted: July-31-2018 at 10:53pm
| Looking for the wood pieces on the bow and the prop |
Posted By: Maxdog154
Date Posted: July-31-2018 at 10:57pm
| Looking for the wood bow pieces on top end and a prop if you have one |
Posted By: Maxdog154
Date Posted: July-31-2018 at 10:58pm
| Looking for the wood on top of the bow end and a prop |
Posted By: anm2254
Date Posted: August-07-2018 at 2:41pm
|
Do you still have the glass from the driver side windshield? |
Posted By: Waketurb
Date Posted: August-17-2018 at 9:30pm
| Does it have the old style pylon with the ring on top? If so could you measure the length and send pics. Price? |
Posted By: 8122pbrainard
Date Posted: August-17-2018 at 11:37pm
For an 86 Martinique? ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Waketurb wrote:Posted By: Waketurb
Date Posted: August-18-2018 at 1:55am
| Looking for a ski pylon for a 76 nautique and I think some of the martinques had the same one. Could be wrong, but that's why I was asking the size and style. Thanks. |
Posted By: 8122pbrainard
Date Posted: August-18-2018 at 8:53am
Jason, The reason I asked is there have been plenty of changes through the years dating back to the 50's. ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: anm2254
Date Posted: August-18-2018 at 10:03am
|
How about the drivers side windshield glass? John |
Posted By: anm2254
Date Posted: August-18-2018 at 10:04am
|
How about the drivers side windshield glass? And the ski pylon John |
Posted By: preilly19824
Date Posted: August-21-2018 at 10:14am
|
I'm looking for a shaft with 422 prop and an 11a rudder also can you ship to Ireland |
Posted By: beardo73
Date Posted: April-09-2019 at 11:12am
|
Bought most of the interior off of this boat. Was pretty nice stuff. Any interior teak pieces left? Thanks! ------------- 1988 Correct Craft Martinique B/R, PCM 454, ~577 HRS. |