Print Page | Close Window

Exhaust Manifold Install Question Printed From: CorrectCraftFan.com Category: Repairs and Maintenance Forum Name: Engine Repair Forum Discription: Engine problems and solutions URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=42897 Printed Date: September-27-2024 at 5:33pm Topic: Exhaust Manifold Install Question Posted By: Wisky Badger Subject: Exhaust Manifold Install Question Date Posted: June-06-2018 at 2:44pm When installing exhaust manifolds do yo need to apply some sort of gasket sealer or do you install them without a sealer? Replies: Posted By: gun-driver Date Posted: June-06-2018 at 3:27pm Just the normal gaskets. Posted By: Wisky Badger Date Posted: June-06-2018 at 5:13pm thanks Posted By: Duane in Indy Date Posted: June-06-2018 at 5:51pm I like to use the Red Hi Temp silicone sealer. ------------- Keep it as original as YOU want it         1978 Mustang (modified) Posted By: Bri892001 Date Posted: June-06-2018 at 6:24pm It's not a bad idea to have a sanding block and/or a wire brush handy. When I replaced mine, there was some light rust/corrosion along the mating surface of the manifold. Good to get as much cleaned off as possible to get a good seal.

Print Page | Close Window