Print Page | Close Window

pos. to pos.: neg. to ???? Printed From: CorrectCraftFan.com Category: Repairs and Maintenance Forum Name: Engine Repair Forum Discription: Engine problems and solutions URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=430 Printed Date: November-24-2024 at 8:16pm Topic: pos. to pos.: neg. to ???? Posted By: curbsidegold Subject: pos. to pos.: neg. to ???? Date Posted: June-01-2004 at 2:53am OK ... I don't get this. I have been pouring over the wiring diagram to my Greymarine 4 -75 and one thing doesn't make sense ... Does the negative terminal on the battery attach to a bolt on the engine housing to complete a circuit when the starter is turned, or is the negative terminal on the battery supposed to be run directly to a grounding bar on the hull. Thanks. ------------- sm Replies: Posted By: 64 Skier Date Posted: June-02-2004 at 8:31am Grounding to the engine is the best. Grounding to the hull and then to the engine is OK...if that's what your talking about. I burned a "Field" wire and had a very tough time trouble shooting an old Ford before I found out the engine ground was loose. Good Luck ------------- 64 Skier 66" HO VTX and 67" HO Triumph http://www.correctcraftfan.com/diaries/details.asp?ID=1071&sort=&pagenum=3&yrstart=1971&yrend=1975 - 71CC

Print Page | Close Window