ski pylon
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=43040
Printed Date: October-31-2024 at 9:33pm
Topic: ski pylon
Posted By: repifanio2
Subject: ski pylon
Date Posted: June-26-2018 at 3:54pm
 ------------- RKE |
Replies:
Posted By: repifanio2
Date Posted: June-26-2018 at 3:54pm
|
How to remove from pole? ------------- RKE |
Posted By: 8122pbrainard
Date Posted: June-26-2018 at 4:18pm
|
Ralph, You'll see a hole below the ring/finger where there's a spring pin. Some call them a roll pin. It's what's holding the ring/finger in the pylon and it needs to be driven out. Then the shank can be really stuck due to corrosion. Some have resorted to applying upwards force with a chain hoist or "come a long" while twisting the ring back and forth. Be carefull not to apply too much force on the ring since some have bent them. ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: repifanio2
Date Posted: June-26-2018 at 4:23pm
|
when you say driven out? what do you recommend to do this? ------------- RKE |
Posted By: 8122pbrainard
Date Posted: June-26-2018 at 4:36pm
Pin punch ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: shierh
Date Posted: June-26-2018 at 4:42pm
| Corroded in is very likely. Use torch to heat up the pole while twisting the ring with something like a shovel handle. Back and forth then lift and twist out. |
Posted By: repifanio2
Date Posted: June-26-2018 at 6:40pm
|
got one pin out but having trouble with the other. Ring seems loose so if I can get the other pin out, should come out. Thanks ------------- RKE |
Posted By: gun-driver
Date Posted: June-27-2018 at 1:05pm
|
Some penetrating spray in the pins help as they corrode also, and heat from the opposite as the spray will help draw the oil in where its needed. Then I got a set of these so I can remove when using my fly high pole 316 Stainless Steel Ring-Grip Heavy Duty Push-Button Quick-Release Pins https://www.mcmaster.com/#standard-quick-release-pins/=1dgu374" rel="nofollow - https://www.mcmaster.com/#standard-quick-release-pins/=1dgu374 |
Posted By: repifanio2
Date Posted: June-27-2018 at 1:58pm
|
thanks for all the help ------------- RKE |