Print Page | Close Window

water pump

Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Engine Repair
Forum Discription: Engine problems and solutions
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=4436
Printed Date: November-27-2024 at 11:46am


Topic: water pump
Posted By: CCxHYPERLITEx
Subject: water pump
Date Posted: August-09-2006 at 12:34pm
hey guys,
will again.my impeller hose had a bad seal to the impeller.so the temp gauge would peg because the block wasnt gettin any water.so we put a silicon bead round it and it did the job rite nice.but what im askin is,is there somethin else i can do or should i keep tryin my luck w/ this seal?

-------------
-will-
http://correctcraftfan.com/diaries/details.asp?ID=1517&yrstart=1981&yrend=1985 - My 84 nautique


Replies:
Posted By: David F
Date Posted: August-10-2006 at 10:47am
You know you can edit your post AFTER you post them. Simply use the "edit" button on the lower center. Editing a post is preferable to double posting. I edit mine all the time.

-------------


Print Page | Close Window