water pump
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Engine Repair
Forum Discription: Engine problems and solutions
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=4437
Printed Date: November-27-2024 at 10:34am
Topic: water pump
Posted By: CCxHYPERLITEx
Subject: water pump
Date Posted: August-09-2006 at 12:37pm
hey guys,
got me another question.my 89 ski nautiques impeller seal with the hose was bad.it was snaggin air causin the impeller to not function right therefore the temp gauge would peg cause the block wasnt gettin any water.so we put a bead of silicon round it and it did the job rite nice.so what im askin is should i keep tryin my look w/ this silicon seal or is there somethin else i can do?
-------------
-will-
http://correctcraftfan.com/diaries/details.asp?ID=1517&yrstart=1981&yrend=1985 - My 84 nautique
|
Replies:
Posted By: GottaSki
Date Posted: August-09-2006 at 2:26pm
Depends, did you take it apart and do it right or just glob it on the outside like a hack?
-------------
"There is nothing, absolutely nothing, half so much worthwhile as messing around with boats...simply messing."
River Rat to Mole
|
Posted By: CCxHYPERLITEx
Date Posted: August-09-2006 at 3:50pm
no i got a little on my finger and put a nice bead around the whole seal
-------------
-will-
http://correctcraftfan.com/diaries/details.asp?ID=1517&yrstart=1981&yrend=1985 - My 84 nautique
|
Posted By: 79nautique
Date Posted: August-09-2006 at 4:39pm
there is suppose to be an o-ring that seals the unit not form-a-gasket. You should pay attention to things when you take them apart.
-------------
http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique
|
Posted By: David F
Date Posted: August-10-2006 at 10:46am
I think he is taking about the inlet hose to the RWP nipple. Sometimes, the inlet hose is larger than the RWP nipple by 1/4" or so. If this is the case, most people use clear vinyl hose as a spacer which effectively enlarges the RWP nipple to fit the inlet hose ID.
-------------
|
Posted By: Nautique2001
Date Posted: August-10-2006 at 3:15pm
What's your Dad's thoughs on this repair?
Ken
-------------
http://www.correctcraftfan.com/diaries/details.asp?ID=1052&sort=&pagenum=4&yrstart=1986&yrend=1990" rel="nofollow - Nautique 2001
|
Posted By: CCxHYPERLITEx
Date Posted: August-10-2006 at 3:36pm
he dont know whats goin on....i do all the work on most everything.car,SUV,truck.....
-------------
-will-
http://correctcraftfan.com/diaries/details.asp?ID=1517&yrstart=1981&yrend=1985 - My 84 nautique
|
|