Print Page | Close Window

Pylon diameter Printed From: CorrectCraftFan.com Category: General Correct Craft Discussion Forum Name: General Discussion Forum Discription: Anything Correct Craft URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=45 Printed Date: December-02-2024 at 10:47am Topic: Pylon diameter Posted By: HudsonSpeeder Subject: Pylon diameter Date Posted: December-15-2003 at 10:33pm I have a Nautique Ski 1992. I just bought it and it's stored right now. I would like to know what the center PYLON diameter is? I would like to mount a video bracket and need to know if it will fit. Thanks to all Replies: Posted By: kenny g Date Posted: December-15-2003 at 11:27pm 1 3/4 "" on mine but a different model and year     kenny g ------------- kenny g Posted By: 882001 Date Posted: December-16-2003 at 10:07pm it is 2.5. kennyg what year boat have you got?? ------------- kemah texas http://www.correctcraftfan.com/diaries/details.asp?ID=163&yrstart=1986&yrend=1990 - 1988 skinautique "2001" Posted By: kenny g Date Posted: December-16-2003 at 10:49pm 1968 thought that they were all the same od just different lengths sorry ------------- kenny g Posted By: 882001 Date Posted: December-17-2003 at 10:16pm i have never seen a 1 3/4. fly high and skylon only make a 2 1/2 and a three. and the three are only used on some oddball centurions. but it is good to know.the oldest nautique i have been in was an 82. i would have lost that bet. does it flex alot? ------------- kemah texas http://www.correctcraftfan.com/diaries/details.asp?ID=163&yrstart=1986&yrend=1990 - 1988 skinautique "2001" Posted By: tryan Date Posted: December-18-2003 at 5:25pm mine is a 2.5 on the 72, but the 69 is a 1.75 solid shaft that only protrudes a few inches above the deck. ------------- http://www.correctcraftfan.com/diaries/details.asp?ID=146&yrstart=1971&yrend=1975 - promo http://www.correctcraftfan.com/diaries/details.asp?ID=192&yrstart=1925&yrend=1970 -    #2 Posted By: HudsonSpeeder Date Posted: December-19-2003 at 12:17am Thanks Guys!! Well I gather it must be 2.5" then. Just want to make sure because I am ordering my Video Bracket for the camcorder. Happy Holidays to all! Hudson

Print Page | Close Window