1984 Ski Nautique windshield
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Gear Wanted
Forum Discription: Wanted water sports gear
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=46692
Printed Date: December-21-2024 at 9:49pm
Topic: 1984 Ski Nautique windshield
Posted By: dandelang
Subject: 1984 Ski Nautique windshield
Date Posted: August-27-2018 at 11:52am
My main glass shattered. I am looking for a replacement.
------------- captaindan
|
Replies:
Posted By: 8122pbrainard
Date Posted: August-27-2018 at 11:55am
8122pbrainard wrote:
dandelang wrote:
My main piece of glass shattered. I am looking for a replacement. Any help out there? |
Your local glass shop is the best place. |
------------- /diaries/details.asp?ID=1622" rel="nofollow -
54 Atom
/diaries/details.asp?ID=2179" rel="nofollow - 77 Tique
64 X55 Dunphy
Keep it original, Pete <
|
Posted By: fishmann06
Date Posted: February-10-2019 at 1:50pm
i have one that came off an 83 mustang Measuring on the inside bottom is 53 1/2 wide. Top is 51 7/8 wide and 20 7/8 tall. I did not take in consideration for the contour of the glass just measured straight across not sure if this will fit but just in case it will work
------------- nj
|
Posted By: ScottZ
Date Posted: February-13-2019 at 11:20pm
I know where one might be in FL. PM me if you are still looking.
------------- Scott Zuelzke Lake Mitchell , AL 1984 Ski Nautique 1972 Skier
|
Posted By: 83CCSN
Date Posted: January-31-2020 at 12:39am
Still looking for a windshield? I have one
|
Posted By: chuckactor
Date Posted: May-16-2020 at 7:33pm
The windshield shattered in my 1985 while towing. Even though they have a curve to them, they are nothing more than a flat piece of tempered glass. When you temper the glass, it becomes somewhat flexible. Anyway... I made a template and had it converted to a CAD file. You just need to find a place that can CNC cut the glass and temper it. They cut the glass before tempering as it will shatter if you try to cut it after the fact.
It took some calling but I found a place that I could email the file to and they would cut and temper it for me. Cost about $121. Installation is the scariest part. Wear gloves and safety glasses and use lotsa dish soap. You'll be amazed how far it bends. I have the CAD file and a drawing. Send me your email and I'll send them to you. Should fit your 84. You can use the drawing to make a cardboard template to double check.
Chuck
|
Posted By: Orlando76
Date Posted: May-16-2020 at 10:35pm
chuckactor wrote:
The windshield shattered in my 1985 while towing. Even though they have a curve to them, they are nothing more than a flat piece of tempered glass. When you temper the glass, it becomes somewhat flexible. Anyway... I made a template and had it converted to a CAD file. You just need to find a place that can CNC cut the glass and temper it. They cut the glass before tempering as it will shatter if you try to cut it after the fact.
It took some calling but I found a place that I could email the file to and they would cut and temper it for me. Cost about $121. Installation is the scariest part. Wear gloves and safety glasses and use lotsa dish soap. You'll be amazed how far it bends. I have the CAD file and a drawing. Send me your email and I'll send them to you. Should fit your 84. You can use the drawing to make a cardboard template to double check.
Chuck |
Holy crap, $121 is a bargain!!
------------- Please support The Cystic Fibrosis Foundation 1976 Ski Nautique 351 Escort 1993 Ski Nautique purple and black 351 HO PCM
|
Posted By: RedSquad7
Date Posted: June-01-2020 at 4:18pm
I had the exact same issue for my '90 SN occur about 2 weeks ago. I take it contact a glass shop from what I am seeing here.
Any other resources? Any and all advice appreciated!
------------- '90 Ski Nautique
High Speed- Low Drag
|
Posted By: Mattlindeberg
Date Posted: June-29-2021 at 3:20pm
Hi do you still have the windshield for sale?
|
|