Trailer bow stop boards
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: General Discussion
Forum Discription: Anything Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=46775
Printed Date: March-10-2025 at 6:26am
Topic: Trailer bow stop boards
Posted By: MourningWood
Subject: Trailer bow stop boards
Date Posted: September-03-2018 at 5:33am
|
Need dimensions for the bow stop boards on a late 70's/early 80's CC trailer, please. ------------- 1964 Dunphy X-55 "One 'N Dun" 'I measured twice, cut three times, and it's still too short!" |
Replies:
Posted By: 8122pbrainard
Date Posted: September-03-2018 at 12:44pm
|
Brian, I'm assuming the dimensions are for your 81?? If so, this picture may help others get you the dimensions. :  ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: MrMcD
Date Posted: September-03-2018 at 3:50pm
|
I re did the trailer on my 1978, I do not know what came off that trailer but I do remember making the new stop boards out of a 2x8 about 18" long. I used Doug Fir thinking Redwood would not take a hit if the boat came in hard. It worked for me for 8 years before I sold that boat and all was still in good shape. ------------- |
Posted By: MourningWood
Date Posted: September-04-2018 at 1:05pm
|
Yes, thanks, thats perfect. I can cobble up a pair with some left over coosa. ------------- 1964 Dunphy X-55 "One 'N Dun" 'I measured twice, cut three times, and it's still too short!" |