Calling Dunphy X55 owners
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: Off Topic
Forum Discription: Anything non-Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=46980
Printed Date: December-23-2024 at 6:21am
Topic: Calling Dunphy X55 owners
Posted By: MourningWood
Subject: Calling Dunphy X55 owners
Date Posted: November-06-2018 at 3:47am
...and there are a few here. I have access to a 3-D printer, and would love to reproduce the 3 emblems on each side of the hull. Problem is I have none. If any Dunphy owners have extras, or are doing a varnish job and can lend them to me, or know someone..... Thanks
------------- 1964 Dunphy X-55 "One 'N Dun"
'I measured twice, cut three times, and it's still too short!"
|
Replies:
Posted By: 8122pbrainard
Date Posted: November-06-2018 at 7:09am
Brian, I'll keep it in mind. The X is stored in the boathouse for the winter so there's no problem with not needing them for a few months. I just need to get down there and remove them.
------------- /diaries/details.asp?ID=1622" rel="nofollow -
54 Atom
/diaries/details.asp?ID=2179" rel="nofollow - 77 Tique
64 X55 Dunphy
Keep it original, Pete <
|
Posted By: MourningWood
Date Posted: November-08-2018 at 1:48am
Thank you Pete... I would be most appreciative.
------------- 1964 Dunphy X-55 "One 'N Dun"
'I measured twice, cut three times, and it's still too short!"
|
Posted By: 8122pbrainard
Date Posted: November-08-2018 at 7:11pm
Brian, I'm curious to what material will be used?
------------- /diaries/details.asp?ID=1622" rel="nofollow -
54 Atom
/diaries/details.asp?ID=2179" rel="nofollow - 77 Tique
64 X55 Dunphy
Keep it original, Pete <
|
Posted By: MourningWood
Date Posted: November-12-2018 at 1:48am
Plastic at first. If enough interest they can be made from metal. A good friend owns a company that makes OEM emblems for Toyota and (formerly) Scion.
------------- 1964 Dunphy X-55 "One 'N Dun"
'I measured twice, cut three times, and it's still too short!"
|
Posted By: 8122pbrainard
Date Posted: November-15-2018 at 4:51pm
MourningWood wrote:
Plastic at first. If enough interest they can be made from metal. A good friend owns a company that makes OEM emblems for Toyota and (formerly) Scion. | Brian, How do they develop the program? A laser scan?
BTW, expect the originals shortly.
------------- /diaries/details.asp?ID=1622" rel="nofollow -
54 Atom
/diaries/details.asp?ID=2179" rel="nofollow - 77 Tique
64 X55 Dunphy
Keep it original, Pete <
|
|