Print Page | Close Window

2001 trailer bunk measurement?

Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: General Discussion
Forum Discription: Anything Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=47140
Printed Date: March-09-2025 at 10:24pm


Topic: 2001 trailer bunk measurement?
Posted By: rosconole
Subject: 2001 trailer bunk measurement?
Date Posted: January-17-2019 at 7:22pm
Can anyone get me a measurement or recall the outside to outside measurement a typical 2001 hull trailer would be to fit. I can't find one anywhere!

-------------
1989 ski nautique ,1991 barefoot nautique, 1993 Mustang Cobra 1998 5.0 Magazine shootout invitee



Replies:
Posted By: dwcar
Date Posted: January-17-2019 at 8:27pm
Ross,
What do you mean outside to outside?

-------------
83Ski


Posted By: rosconole
Date Posted: January-17-2019 at 9:15pm
on the rear of the bunks yes , mine is a few states away to check it at the moment!

-------------
1989 ski nautique ,1991 barefoot nautique, 1993 Mustang Cobra 1998 5.0 Magazine shootout invitee


Posted By: TRBenj
Date Posted: January-17-2019 at 9:39pm
17 degrees


Posted By: rosconole
Date Posted: January-17-2019 at 9:51pm
I meant the physical measurement in inches side to side on the rear of the bunks,. not the pitch of the wood!

-------------
1989 ski nautique ,1991 barefoot nautique, 1993 Mustang Cobra 1998 5.0 Magazine shootout invitee


Posted By: KENO
Date Posted: January-17-2019 at 10:54pm
Originally posted by rosconole rosconole wrote:

Can anyone get me a measurement or recall the outside to outside measurement a typical 2001 hull trailer would be to fit. I can't find one anywhere!


Maybe you'll find what you're looking for in the link to an old thread below   ......maybe

http://www.correctcraftfan.com/forum/forum_posts.asp?TID=41744&title=3-trailer-for-sale" rel="nofollow - link



Posted By: rosconole
Date Posted: January-18-2019 at 2:20am
Its actually closer to 49" ... measuring it in the pouring rain....hopefully 54" wide will work ok till I remodel the other.

-------------
1989 ski nautique ,1991 barefoot nautique, 1993 Mustang Cobra 1998 5.0 Magazine shootout invitee


Posted By: Hollywood
Date Posted: January-18-2019 at 2:58am
69 pounds


Posted By: KENO
Date Posted: January-18-2019 at 9:30am
What's a half inch?

The guy in the other thread measured his indoors, in plenty of light, dry and measured 2 trailers as compared to yours being measured in the pouring rain, in the dark by somebody 3 states away .


Posted By: KENO
Date Posted: January-18-2019 at 9:46am
Originally posted by KENO KENO wrote:

What's a half inch?


I figure Pete's probably coming up with some conversions so I'll get it started   

12.7 mm

.04 ft

.014 yards

12700 micrometers

1/3960 of a furlong

just to get it started



Posted By: Brit_hunsicker
Date Posted: January-18-2019 at 10:05am
Originally posted by KENO KENO wrote:

What's a half inch?

Let’s not forget 6.8575e-6 of a nautical mile since we are talking about boats and all.


Posted By: SNobsessed
Date Posted: January-18-2019 at 10:26am
OK, I'll bite!

Why is this relevant?

Are you building a temp trailer?

-------------
“Beer is proof that God loves us and wants us to be happy.”

Ben Franklin


Posted By: rosconole
Date Posted: January-19-2019 at 4:21am
trying to see if it will work on donor cypress gardens trailer thanks gang

-------------
1989 ski nautique ,1991 barefoot nautique, 1993 Mustang Cobra 1998 5.0 Magazine shootout invitee


Posted By: SNobsessed
Date Posted: January-19-2019 at 9:18am
So it was dipped in holy water!

You could sell the bunk carpet on ebay & make a small fortune . . .

-------------
“Beer is proof that God loves us and wants us to be happy.”

Ben Franklin



Print Page | Close Window