5.8 PCM Engine
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=47156
Printed Date: November-22-2024 at 9:22pm
Topic: 5.8 PCM Engine
Posted By: BahamaBill
Subject: 5.8 PCM Engine
Date Posted: January-26-2019 at 1:14pm
Greetings. New member here and I am in the process of refurbing a 1986 Fish Nautique. I have the low hour (391) engine up for sale. If I did not already have a new 5.7 vortec from the part out of my Baha I would definitely keep it but it has to go. Here is the Craigslist link, there is a you tube link there of the engine running. Thanks for looking.
https://miami.craigslist.org/pbc/bpo/d/jupiter-marine-engine-58-pcm/6804324314.html
|
Replies:
Posted By: BahamaBill
Date Posted: February-28-2019 at 1:03pm
I've had quite a few tire kickers contact me about the engine but if anyone is seriously interested there is a revised price on Craigslist and it is now listed on e-bay
https://www.ebay.com/itm/5-8-Ford-Marine-Engine/233142630616?hash=item36486238d8:g:BLEAAOSwbmFcatH9:rk:1:pf:0
|
Posted By: 8122pbrainard
Date Posted: February-28-2019 at 1:35pm
Bill,
I looked at both listings and noticed you haven't mentioned the hours. You did say it's a low hour engine but the exact may help. Also, running a compression test and listing the results may help as well.
-------------
/diaries/details.asp?ID=1622" rel="nofollow -
54 Atom
/diaries/details.asp?ID=2179" rel="nofollow - 77 Tique
64 X55 Dunphy
Keep it original, Pete
<
|
Posted By: BahamaBill
Date Posted: February-28-2019 at 2:01pm
Peter,
Thanks for your interest. Both ads do have the hours listed at 391 total hours. I am baseing this on the tach hour meter which was installed at the same time as the engine. After the engine was installed the boat was lift kept on a freshwater lake in central Florida.. Everything that I have learned about the boat and engine so far has turned out to be valid.
I did do a compression check when I installed the new manifolds ,unfortunately the lock out function on my tester was not working and I could not get an accurate reading but all the cylinders were 100 plus lbs and appeared to be with in range. The engine is set up for running and testing, as I run it on a regular basis, anyone that is interested is welcome to do any tests on it that they require.
|
Posted By: BahamaBill
Date Posted: April-11-2019 at 11:22am
Price drop. Surely someone needs an engine for a project or just a spare.
https://miami.craigslist.org/pbc/bpo/6861948696.html
|
Posted By: Gary S
Date Posted: April-11-2019 at 12:51pm
Surprised someone hasn't snatched this up. Shows the sad state of affairs for inboards in south Florida.
-------------
http://www.correctcraftfan.com/diaries/details.asp?ID=1711&sort=&pagenum=1&yrstart=1966&yrend=1970" rel="nofollow - 69 Mustang HM SS
95 Nautique Super Sport
|
Posted By: Fl Inboards
Date Posted: April-11-2019 at 12:54pm
Seems nobody will pay what this stuff is worth.
I to have a newly rebuilt "Fresh water cooled" 5.8 with trans.
Going to give it away for scrap!!
-------------
Hobby Boats can be expensive when the hobbyist is limited on their own skill and expertise.
1993 Shamrock "fat" 20. 2008 Nautique 196 5.0
|
Posted By: BahamaBill
Date Posted: May-25-2019 at 11:34am
|
Update: Engine sold and on the way to NH where its new home will be in a Shamrock.
|
|