69 Ski Nautique Fiberglass Schedule/Materials
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=47316
Printed Date: November-15-2024 at 12:39pm
Topic: 69 Ski Nautique Fiberglass Schedule/Materials
Posted By: SN1648
Subject: 69 Ski Nautique Fiberglass Schedule/Materials
Date Posted: April-03-2019 at 3:00pm
|
Im looking for a ball park guess on how many yards of (fiberglass) material i should buy to start my stringers in my 69 Ski Nautique. The primaries and secondaries are kiln dried doug fir. The fir will have 3 coats each of resin. My layup plan is two layers of 2”,4”8” 8.7 oz tape on primaries and two layers of 17oz biax up each side and a cap on top. For the secondaries i plan on one layer of tape also 2”,4”8” and 17oz biax up and over to cap them. Going to order through us composites and will be using their 3:1 epoxy. Thank you all for your input. Zach
|
Replies:
Posted By: SN1648
Date Posted: April-04-2019 at 8:02am
Posted By: samudj01
Date Posted: April-04-2019 at 1:20pm
I don’t have an exact answer for you but I’d go with one layer of each of the tapes and then in addition to your biax maybe get a roll of 12in. We found all of the rolls of tape to be very useful. You will have to measure for amounts/ lengths needed. I can say this, a little extra glass is the cheap part. Over order the cheap parts, glass, cabosil etc. shipping is expensive if you need just a little more. Shoot me your email and I will send you a word doc with our us composit orders (3 unfortunately) for a 16 ft tique.
-------------
78 Ski Tique, 72 Skier w/302's, 93 SN w/351 & 17 GS22 w/zr409
Previous - 99 Sport Nautique w/GT40 and 87 Martinique w/351
|
Posted By: SN1648
Date Posted: April-04-2019 at 2:45pm
|
Sledneck175@icloud.com. Thank you!
|
|