Print Page | Close Window

How Much Engine Oil? Printed From: CorrectCraftFan.com Category: General Correct Craft Discussion Forum Name: General Discussion Forum Discription: Anything Correct Craft URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=47361 Printed Date: March-09-2025 at 9:30am Topic: How Much Engine Oil? Posted By: Fiberglassic Subject: How Much Engine Oil? Date Posted: April-16-2019 at 5:04pm Can you experts please help me with the correct amount of oil I should get out of this Chryslers crank case pan? The Correct Craft is a 1965 Barracuda and the engine was an entire swap out in the early 90’s. Below is everything else I know. •     Very low hour, perfectly running 1990, maybe 80’s L 318 Mopar •     On trailer, 3rd wheel full up, hull water flows very slightly toward bow. •     Dip stick mounted port rear bottom of crank case reads right at Full line. •     Cold, from inside oil tube sucked a hair more than 5 qts oil out, now dry. •     Very Large PH8A (I know) held at least a ½ qt of oil. •     Has no front or rear oil drain plug, only other is starboard rear bottom of pan. Question is do I still have oil in the front dip of the pan and if so how can I get it out or do I have to add 5 fresh qts of oil to it. Thanks…Scott ------------- Scott

Print Page | Close Window