More parts!
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=47392
Printed Date: November-22-2024 at 10:03pm
Topic: More parts!
Posted By: JDD33
Subject: More parts!
Date Posted: April-28-2019 at 11:33pm
|
So I have a few parts that need new homes. Let me know if there's anything you might need. I'll add more pictures as I locate more stuff. Thanks, John http://photos.app.goo.gl/5v8HmFMpQJ4oBpN28" rel="nofollow - Parts Album ------------- Old school goin back to school! |
Replies:
Posted By: LakeTrash
Date Posted: April-29-2019 at 1:03am
| PM Sent. Seat bases, Right Morse control, CC emblems. |
Posted By: Fiberglassic
Date Posted: April-30-2019 at 4:03pm
|
I’m interested in 3 vent cowls, 2 front air intake vents, and Barracuda emblem. Let me know how much for all plus shipping to Raleigh, NC……Scott ------------- Scott |
Posted By: 93/70 ccpb
Date Posted: April-30-2019 at 5:43pm
|
thanks john flagpost arrived... did you get check?dan in ohio. ------------- what you dont want to hear from jbear and bill.you cant get in the boat till you get your minute,and they throw you back in water! |
Posted By: JDD33
Date Posted: April-30-2019 at 9:38pm
|
I did Dan! Thank you! ------------- Old school goin back to school! |
Posted By: nic.meyer15
Date Posted: May-01-2019 at 12:30am
|
Do you have any parts for the dash? I have a 99 SN and my perfect pass doesn't work, and the gauge is popping out, looking to replace it with something. Any ideas? ------------- Nic Meyer |
Posted By: JDD33
Date Posted: May-01-2019 at 11:28pm
|
Hey Nic, Most of my parts are 87 and older. If your PP isn't working what about trying to find another speedo that matches the one you have, I seen a few for sale. If you find one you could possibly have it converted to GPS internals? Just an idea... ------------- Old school goin back to school! |
Posted By: nic.meyer15
Date Posted: May-02-2019 at 12:50am
|
Thank you, I will look into that! ------------- Nic Meyer |
Posted By: JDD33
Date Posted: May-05-2019 at 12:42pm
|
I've updated the link as some parts have sold. Let me know if you need better pictures. Is there any interest in the 318 parts? Engine and trans mounts, fly wheel, bell housing, front cover block off plates, RWP in nice shape, misc. copper cooling parts? Still working on pulling together more parts. Thanks, John. ------------- Old school goin back to school! |
Posted By: swilliams
Date Posted: May-05-2019 at 5:04pm
|
John, I am looking for a battery locker lid. Mines a 76’ Martinique so I would assume they are all about the same from then. Fits between the seats up front. Thanks, Steve ------------- 1976 Martinique,350 Omc. 1975 Glastron/Carlson CV16,115 Merc. |
Posted By: JDD33
Date Posted: May-05-2019 at 9:16pm
|
Steve, I know exactly what your talking about but unfortunately I don't have anything like it. Good luck, John ------------- Old school goin back to school! |
Posted By: 8122pbrainard
Date Posted: May-05-2019 at 10:28pm
Steve, https://www.greatlakesskipper.com/catalogsearch/result/?q=hatch+trim+ring&cat=" rel="nofollow - Take a look to see if any of these trim ring sizes fit. The center get filled with ply and carpet. Are the trim rings what you're looking for? ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
swilliams wrote:Posted By: swilliams
Date Posted: May-05-2019 at 10:49pm
|
Basically,yes. Good idea! Can always modify one if needed. ------------- 1976 Martinique,350 Omc. 1975 Glastron/Carlson CV16,115 Merc. |