Print Page | Close Window

Zero Off not working

Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: General Discussion
Forum Discription: Anything Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=47564
Printed Date: February-18-2025 at 6:46pm


Topic: Zero Off not working
Posted By: dstop
Subject: Zero Off not working
Date Posted: June-08-2019 at 11:49pm
Hi All

I have a Ski Nautique 2010 with a Zero Off unit.

I just put the boat in the water for the first time this season and my Zero Off wasn’t working,

At First I thought it was the connector, because some times in the past the connecter would come loose from the head unit.

When I checked it the today the Head unit was actually disconnected from the connector, however when I reconnected it, it still didn’t start up.

I am unable to get it to start up. The strange thing is that last fall it was working fine before I put it away for the winter.

I had a look at the wiring and all seems ok,

I have no way to test the head unit, to see if it works and maybe its just a wore connection.

Any thoughts

Please let me know ASAP, summers short here in Canada

Thanks




Replies:
Posted By: tryathlete
Date Posted: June-09-2019 at 12:08pm
Give these guys a call tomorrow

https://www.zerogps.com/


Posted By: tryathlete
Date Posted: June-09-2019 at 12:09pm
Email - Technical Assistance: support@zerogps.com


Posted By: dstop
Date Posted: June-09-2019 at 1:46pm
Yup. Thats the plan .

Only I was hoping to try to figure it out over the weekend.

Thanks





Posted By: tryathlete
Date Posted: June-09-2019 at 5:25pm
Originally posted by dstop dstop wrote:

Yup. Thats the plan .

Only I was hoping to try to figure it out over the weekend.

Thanks





Yeah I get it. If you want to fix it yourself there are a whole host of manuals on their site too. I have no idea how the whole signal processing works but I suspect since Zero off only works with ECM based throttles which I assume work off of the CAN bus on some sort of J-1939 protocol or newer. Maybe check power connections, fuses and breakers just to do the basics. It’s probably something simple!


Posted By: dstop
Date Posted: June-09-2019 at 6:45pm
I cant figure out where the fuse or breaker would be for the Zero off unit
any idea ?


Posted By: tryathlete
Date Posted: June-09-2019 at 7:04pm
Call Jody Seal at Florida Inboards or PM him on this site if The Perfect Pass folks don’t come through. He’s a wizard.

http://www.floridainboards.com/




Print Page | Close Window