Print Page | Close Window

Cleaning Rudder and Fins

Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: General Discussion
Forum Discription: Anything Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=47579
Printed Date: March-08-2025 at 7:41pm


Topic: Cleaning Rudder and Fins
Posted By: Otto Throttle
Subject: Cleaning Rudder and Fins
Date Posted: June-12-2019 at 3:11am
What is the best way to clean the rudder and fins? Mine has the green streaks on it from the copper in the metal.

Thanks,

Otto



-------------
Otto


Replies:
Posted By: phatsat67
Date Posted: June-12-2019 at 10:33am
Mild wire wheel on an angle grinder will clean and polish both up to a nice finish.

Posted By: 67 ski nat
Date Posted: June-12-2019 at 11:34am
Harbor freight has scotch bright pads mounted on a 2” wheel chuck that you can use with a drill. Spread brasso on pad and fin. Scrubs green and tarnish off really well without scratching brass and leaving permanent marks. Then just polish with brasso on terrycloth like a chrome bumper. Did mine last weekend


Print Page | Close Window