Starting problem
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=47585
Printed Date: November-15-2024 at 11:31am
Topic: Starting problem
Posted By: leftseat88
Subject: Starting problem
Date Posted: June-13-2019 at 9:47pm
96 sport with efi.
Turned the key to start and nothing happened. Heard the fuel pump engage but didn’t start. Tried again, nothing. Third time a charm, fired right away as it always does. This was the second time this has happened. Both times it started on the third attempt. Before I go and start replacing parts “Willy Nilly”, what should I look at first? Ignition switch? Starter? Relay? I wouldn’t call myself mechanically inclined so speak slowly !!!! Thanks
|
Replies:
Posted By: 8122pbrainard
Date Posted: June-13-2019 at 9:51pm
Jason, The first thing to look at is the battery cable connections. Make sure they are clean and tight. Clean both wit a battery post/cable terminal cleaner. It has male and female wire brushes that do a great job.
------------- /diaries/details.asp?ID=1622" rel="nofollow -
54 Atom
/diaries/details.asp?ID=2179" rel="nofollow - 77 Tique
64 X55 Dunphy
Keep it original, Pete <
|
Posted By: leftseat88
Date Posted: June-13-2019 at 9:56pm
Battery connections are tight and clean.
|
Posted By: 8122pbrainard
Date Posted: June-13-2019 at 10:00pm
Next when it happens again is to jiggle the throttle/shift to see if maybe the NSS (neutral safety switch) is open not allowing the start relay to energize. If that is the problem then a shift cable adjustment is needed.
------------- /diaries/details.asp?ID=1622" rel="nofollow -
54 Atom
/diaries/details.asp?ID=2179" rel="nofollow - 77 Tique
64 X55 Dunphy
Keep it original, Pete <
|
Posted By: leftseat88
Date Posted: June-13-2019 at 10:05pm
Sounds good thanks. There are 2 relays on the back of the motor. I believe that one maybe the the fuel pump relay, is the other one a start relay?
|
|