What I have Learned
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: General Discussion
Forum Discription: Anything Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=47750
Printed Date: March-06-2025 at 7:58pm
Topic: What I have Learned
Posted By: 91NaughtyQ
Subject: What I have Learned
Date Posted: July-16-2019 at 1:30pm
|
SInce joining this forum here are somethings I have learned - If my boat has an issue it has happened to one or many of you and you know exactly how to fix it. I am the guy who used to take everything to the shop for any repairs because I was not confident in my knowledge or abilities as an engine mechanic- With help from all the folks on here I have done the following - Restored GelCoat (wet sand, polish, wax process etc...) Restored Teak Platform (WATCO RULES) PCM Retro Kit from PRO TEC (Thank god) Rebuilt Carb - (Boat starts and runs like FI) Rewired to the DASH (much needed) Main Fuel Line Change Fuel Line from Carb change Installed 2nd Battery, selector Switch, stereo ETC. Installed Perfect Pass Now if something is an issue on the boat, I simply tell my wife no worries I will check the forum and get it taken care of. I am sure there is other small stuff but just wanted to say thanks and this is by far the most knowledgeable CC group on the planet. ------------- 1991 Ski Nautique (Previous)1984 Ski Nautique 2001 |
Replies:
Posted By: KENO
Date Posted: July-16-2019 at 1:41pm
|
So what you really learned is that asking questions, listening to advice and not being afraid to dive into things, there's a whole lot you can do yourself And you did 
|
Posted By: 91NaughtyQ
Date Posted: July-16-2019 at 2:08pm
Yes sir exactly! ------------- 1991 Ski Nautique (Previous)1984 Ski Nautique 2001 |
KENO wrote:Posted By: td_in_nc
Date Posted: July-16-2019 at 5:12pm
| Well said - this forum is great for sharing knowledge |