'82 CC Attwood trailer jack wheel
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Boat Maintenance
Forum Discription: Discuss maintenance of your Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=47804
Printed Date: November-15-2024 at 10:20am
Topic: '82 CC Attwood trailer jack wheel
Posted By: MourningWood
Subject: '82 CC Attwood trailer jack wheel
Date Posted: July-24-2019 at 9:03pm
|
Original steel wheel, center has broken out, doesn't roll. Appears to be held in with a riveted pin, which can be ground off and removed. Anyone find a suitable replacement wheel? Thx ------------- 1964 Dunphy X-55 "One 'N Dun" 'I measured twice, cut three times, and it's still too short!" |
Replies:
Posted By: MourningWood
Date Posted: August-04-2019 at 1:47pm
I bought a 6" jack wheel from etrailer. ( F6811S00 for $17.00 ) The description references Fulton jack, the original CC unit is Attwood. It works perfectly. Drill out the original rivet, then enlarge the hole on one side to fit the replacement axle bolt.  ------------- 1964 Dunphy X-55 "One 'N Dun" 'I measured twice, cut three times, and it's still too short!" |