PCM 302 PCV valve
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Engine Repair
Forum Discription: Engine problems and solutions
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=4784
Printed Date: November-27-2024 at 2:05pm
Topic: PCM 302 PCV valve
Posted By: 77stang
Subject: PCM 302 PCV valve
Date Posted: September-16-2006 at 1:08pm
I would appreciate some part numbers for anyone who has replaced the valve.
I'm having a hard time finding the correct replacement. The part number on mine is ACC801 and i've been unable to cross reference it. NAPA although very helpful couldnt do it either.
Thanks alot,
Jerry
-------------
http://correctcraftfan.com/diaries/details.asp?ID=1360&yrstart=1971&yrend=1975 - '77 Mustang 17
|
Replies:
Posted By: 79nautique
Date Posted: September-16-2006 at 1:15pm
all PVC valves are pretty much the same all you have to match up is the diameter for the base where it goes in the valve cover and the vaccum hose of the current one. Most likely the hose fitting is going to be undersized so just use a hose clamp on it.
-------------
http://www.correctcraftfan.com/diaries/details.asp?ID=756&sort=&pagenum=1&yrstart=1979&yrend=1979 - 79 nautique
|
Posted By: 77stang
Date Posted: September-16-2006 at 2:03pm
thanks 79,your contributions are always appreciated.
-------------
http://correctcraftfan.com/diaries/details.asp?ID=1360&yrstart=1971&yrend=1975 - '77 Mustang 17
|
|