Parting out Martinique
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=48050
Printed Date: November-21-2024 at 9:58pm
Topic: Parting out Martinique
Posted By: Riley
Subject: Parting out Martinique
Date Posted: September-16-2019 at 9:59am
|
We picked this boat up for the trailer. Haven't had any luck trying to re sell the boat, so have decided to part it out. It is a solid boat that runs really well. We are selling everything, but the trailer, pylon, strut, rudder, rudder port and the gauges, excepting the speedo.. Engine runs strong and reportedly had the transmission replaced 2 years ago with a new one. If anyone is interested, you can send me a PM.        
|
Replies:
Posted By: TRBenj
Date Posted: September-16-2019 at 11:28am
| After all the excitement surrounding this boat I can’t believe you’re not keeping it. |
Posted By: 8122pbrainard
Date Posted: September-16-2019 at 11:38am
The Hart boatyard is getting too crowded!  ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
TRBenj wrote:Posted By: Riley
Date Posted: September-16-2019 at 11:45am
| That beautiful Penn Yan Avenger 23' Flybridge in the background is for sale, too. It's on Craigslist. Very nice boat with a PCM engine. |
Posted By: Hollywood
Date Posted: September-16-2019 at 12:27pm
| Is it also full of leafs and beer cans? |
Posted By: gun-driver
Date Posted: September-16-2019 at 12:50pm
He’s throwing them in with the deal, no charge 
|
Posted By: Riley
Date Posted: September-16-2019 at 1:03pm
I spent several hours detailing the Martinique once for a potential buyer who felt the interior was too rough. I wanted to buy a cover for it, but the boss said no, so it filled up with leaves. Good thing, as it's now a parts boat, (read the title Hollywood). Penn Yan is the boat with the shrink wrap. It's a pretty sweet boat. |
Posted By: lakemurraybass
Date Posted: October-30-2019 at 2:12pm
|
I need the rudder. Do you still have? lakemurraybass@yahoo.com |
Posted By: Riley
Date Posted: October-30-2019 at 3:22pm
| Sorry, Rudder is not available. |
Posted By: Riley
Date Posted: November-27-2019 at 11:12am
| Most of this boat is still available. Excepting engine/trans, gauges, rudder, rudder port, strut. |
Posted By: Riley
Date Posted: November-27-2019 at 11:20am
| Also have 1986 BFN motor box and some other assorted interior parts. |
Posted By: LJR Gunlock
Date Posted: June-19-2020 at 9:26am
|
Please let me know if the ski pylon is available. Also, length of pylon from floor to top? ------------- ljr |
Posted By: tleed
Date Posted: November-12-2020 at 9:08pm
|
I need a 1" diameter, 40.5" prop shaft, prop strut, and rudder for a 1974 Southwind 18. If any of these parts swap to my boat, I'm interested. I could use an engine cover also. Still have them? Thomas ------------- Thomas 1974 Southwind 18 with 318 cubic inches of reverse rotation roller cam "Moparvation" |
Posted By: tjdarland
Date Posted: January-02-2021 at 10:42pm
|
Hey Riley. The boat pics are no longer available since the ransomeware attack. I’m looking for a steering wheel, speedo, and side windshield vents for a 1980 ski nautique. Do you have anything that would swap out? Thanks, Todd ------------- tjd |
Posted By: Riley
Date Posted: January-03-2021 at 8:26am
| The steering wheel and speedo have been sold. Just about everything from the boat is gone. There wasn't much on it that would be good for a SN. |
Posted By: tpayner19
Date Posted: January-07-2021 at 10:14am
|
Curious what year, I know you said just about everything is gone, but we have a '72 Martinique with a newer style Morse throttle and would like to get it back closer to an original. You wouldnt happen to still have the throttle/shift assembly would you? ------------- 1972 Martinique 2004 Super Sport Nautique 2006 Ski Nautique 206 Three Lakes, WI |
Posted By: Riley
Date Posted: January-07-2021 at 10:48am
| 1989, completely different boat. You want an MV1. Start a thread in the parts wanted section, and check ebay. |
Posted By: tpayner19
Date Posted: January-07-2021 at 1:02pm
|
Thanks for the quick reply, just happened to see this thread and I never hurts to ask. ------------- 1972 Martinique 2004 Super Sport Nautique 2006 Ski Nautique 206 Three Lakes, WI |
Posted By: willice0
Date Posted: April-17-2021 at 11:22am
|
Do you happen to have the rear grab rail that wraps around the sundeck area? If so, I'll buy it. I'm also looking for the small teak trim piece from the dashboard just left of the wheel. It is almost s-curved and around an inch long. Ours split out. ------------- '86 CC Martinique |
Posted By: jbriede
Date Posted: April-20-2021 at 3:37pm
|
I have a 85 Martinique I think I will part out. willice0 I may have the grab rail and trim piece you are looking for. I will have to look at the boat. Do you have a picture of the grab rail and trim piece? I will make a separate 'parts for sale' post at some point. It'll have pictures and and a list of parts. But if anyone is looking for Martinique parts, let me know. I have a mostly complete boat.
|
Posted By: Riley
Date Posted: April-20-2021 at 8:18pm
| I've got the rail that goes around the rear sun deck. It is in nice condition, but it is huge and not shipable. |
Posted By: willice0
Date Posted: April-22-2021 at 10:23pm
|
Here’s a picture of the rear rail style I’m looking for: https://boats-from-usa.com/sites/default/files/styles/large/public/boats/correct-craft/76089/correct-craft-846832.jpg?itok=eCkxFjgn I’m also looking for the glove compartment door with latch: https://boats-from-usa.com/sites/default/files/styles/large/public/boats/correct-craft/76089/correct-craft-846838.jpg?itok=0zogqXIZ Where are you located? It would be crazy expensive to ship that rear rail. ------------- '86 CC Martinique |
Posted By: stm1258
Date Posted: May-03-2021 at 7:15am
|
Howdy, My left front windshield glass broke over the window. Still have that I hope? Thanks for your time, -Sean
|
Posted By: Tommyboy1904
Date Posted: September-01-2021 at 7:45pm
|
you dont by chance still have the rudder do you? |