85 2001 seat hinges
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: General Discussion
Forum Discription: Anything Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=48060
Printed Date: March-06-2025 at 2:11pm
Topic: 85 2001 seat hinges
Posted By: 99airwarrior
Subject: 85 2001 seat hinges
Date Posted: September-18-2019 at 3:43am
| Hi my 85 2001 port side seat has the hinges with the removable pins some stuck bolts in their place. can you tell me what the original looked like? Was it a clevis pin or a push release pin? also what size 3/8 ? or 1/4 inch Thank You Joe |
Replies:
Posted By: 8122pbrainard
Date Posted: September-18-2019 at 7:40am
Joe, https://www.nautiqueparts.com/product/hinge-seat-motor-box-80-s-nautiques/" rel="nofollow - Are the hinges like these? 3/8 or 1/4? Can you measure the holes? ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
99airwarrior wrote:Posted By: gun-driver
Date Posted: September-18-2019 at 12:30pm
| They are the same as the back seat ones. |
Posted By: babybooey
Date Posted: September-18-2019 at 1:37pm
Assuming mine are original (complete unsure) here are the hinges on the floor: here is a blurry pick of the part on the seat: 
|
Posted By: 99airwarrior
Date Posted: September-18-2019 at 3:10pm
| 8122pbrainard Yes they are exactly like the ones in the picture . It looks like a Clevis pin. I will have to mic the size of the hole Thank You Joe |
Posted By: 99airwarrior
Date Posted: September-20-2019 at 1:18am
| 5/16 they are right at 1 inch long so I probably need 1 1/4 inch long clevis pin Thank You for all the help |