1956 Carburetor (Graymarine 70)
Printed From: CorrectCraftFan.com
Category: Repairs and Maintenance
Forum Name: Engine Repair
Forum Discription: Engine problems and solutions
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=48273
Printed Date: November-27-2024 at 7:37am
Topic: 1956 Carburetor (Graymarine 70)
Posted By: 56-Atom
Subject: 1956 Carburetor (Graymarine 70)
Date Posted: December-15-2019 at 12:26pm
|
The carburetor for my 1956 Atom is removed for winter clean-up. I have the original maintenance manual, helpful for me to learn the parts and functions etc. Regarding carb maintenance the manual recommends sending for "Graymarine Service Bulletin No. 533 (no charge)" I don't have and google search did not locate this info. Suggestions and recommendations for a 1956 Graymarine 70 carb overhaul? This is for general clean-up and replacement of gaskets as the engine performed well this past summer.   ------------- 56-Atom https://www.facebook.com/media/set/edit/a.1729455880510267/ |
Replies:
Posted By: 8122pbrainard
Date Posted: December-15-2019 at 12:47pm
|
John, Call http://finewoodboats.com/" rel="nofollow - Jim at Fine Wood Boats for a rebuild kit. He will need the carb number that's on the small round brass disc attached to it. I highly doubt you will need the service bulletin since the carb is probably the simplest out there to rebuild. . As you see on Jim's site, he is moving and will be my new neighbor. I just made a dump run and stopped at his house on my way back to see if he was around. Not yet as I'm sure he's still very busy with the move. I believe he told me he has like 70 engines to move and then there's all the "smaller" stuff ! ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: 56-Atom
Date Posted: December-15-2019 at 1:06pm
 Thanks Pete!  ------------- 56-Atom https://www.facebook.com/media/set/edit/a.1729455880510267/ |
He will need the carb number that's on the small round brass disc attached to it. [/QUOTE wrote: