Federal 13 x 13 prop
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=48533
Printed Date: November-22-2024 at 10:54am
Topic: Federal 13 x 13 prop
Posted By: 76tique
Subject: Federal 13 x 13 prop
Date Posted: April-10-2020 at 4:25pm
|
Stock prop from my '84 Nautique 2001 for sale. I upgraded to an Acme 542 and then sold the boat. Hung onto this one hoping to use it as a spare for a future boat. Doesn't look like the future boat is going to happen. This prop ran smoothly, no dings, in great shape. Will ship anywhere in continental US. Asking $125. Thanks for looking!      ------------- He who dies with the most toys, wins http://www.correctcraftfan.com/diaries/details.asp?ID=5648&sort=&pagenum=2" rel="nofollow - 1984 SN2001 - sold 1976 Ski Tique - Sold |
Replies:
Posted By: 76tique
Date Posted: June-01-2020 at 2:45pm
|
June bump. Anybody need a prop? $125 shipped to you in the lower 48. ------------- He who dies with the most toys, wins http://www.correctcraftfan.com/diaries/details.asp?ID=5648&sort=&pagenum=2" rel="nofollow - 1984 SN2001 - sold 1976 Ski Tique - Sold |
Posted By: hayajustin
Date Posted: June-09-2020 at 10:38am
|
Hello, I am running a 12" x 13 Federal prop RH 1" shaft. I recently had to install my spare, so I am looking for another backup. I don't see any reason why I couldn't use your prop. I have the clearance for the extra inch of diameter. Justin 1987 Martinique |
Posted By: 8122pbrainard
Date Posted: June-09-2020 at 11:07am
The 13" will be 1/2" closer to the hull so, understand that's below the normal so you may get hull rash. Hull rash is when the gel and sometimes even the fiberglass is eroded due to cavitation from the prop running close to the hull. ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
hayajustin wrote:Posted By: 76tique
Date Posted: June-09-2020 at 11:35am
|
Hi Justin, Per this thread: http://www.correctcraftfan.com/forum/forum_posts.asp?TID=35744&title=best-prop-for-86-martinique" rel="nofollow - 86 Martinque best prop It looks like a 13" prop should be fine on your Martinique. I am not familiar with your boat, but on that thread I see some of our most experienced forum members recommending a 13" prop. (They also believe 13 x 13 was possibly stock.) I am surprised that your boat would have a 12" prop installed, being a little heavier than a 2001 of the same vintage. I would think you would get better performance out of the hole with a 13" diameter. 13" dia x 12 pitch makes more sense to me, but I am not as experienced as some here. That being said, my first Nautique was a Ski Tique, which someone had installed a 13 x 13 prop on. Those smaller boats were definitely designed for a 12" diameter prop, and mine clearly had some hull rash from the 13". Anyway, the prop is still available - let me know if you are still interested. Thanks, Tom ------------- He who dies with the most toys, wins http://www.correctcraftfan.com/diaries/details.asp?ID=5648&sort=&pagenum=2" rel="nofollow - 1984 SN2001 - sold 1976 Ski Tique - Sold |
Posted By: hayajustin
Date Posted: June-09-2020 at 8:26pm
|
Tom, Private Message sent. Justin |
Posted By: 76tique
Date Posted: June-10-2020 at 3:04pm
|
Sold! Thanks, Justin. ------------- He who dies with the most toys, wins http://www.correctcraftfan.com/diaries/details.asp?ID=5648&sort=&pagenum=2" rel="nofollow - 1984 SN2001 - sold 1976 Ski Tique - Sold |