Print Page | Close Window

Refurbishing Dash 1981 Ski Nautique Printed From: CorrectCraftFan.com Category: Repairs and Maintenance Forum Name: Boat Maintenance Forum Discription: Discuss maintenance of your Correct Craft URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=48567 Printed Date: November-15-2024 at 3:58am Topic: Refurbishing Dash 1981 Ski Nautique Posted By: jc91 Subject: Refurbishing Dash 1981 Ski Nautique Date Posted: April-19-2020 at 3:32pm While going through the restoration, I am now starting to focus on finishes of the boat and realized that the gelcoat on the dash is porous / has small cracks in it. I have sanded the dash down to see if I can get below the imperfections but I think by the time I get down below them I will have some fiberglass showing through and will need to re-gel the dash. I am already re-gelling the rest of the hull so I am not concerned with needing to do this, but I figured I would see if anyone has any tips on how to go about gel coating two different colors right next to each other while keeping the transition smooth. Should I re-gel the hull, tape off the line and re-gel the dash and then block sand everything down at once? Anyone who has done this before and has tips for it would be appreciated!

Print Page | Close Window