Gt40 starter solenoid
Printed From: CorrectCraftFan.com
Category: General Correct Craft Discussion
Forum Name: General Discussion
Forum Discription: Anything Correct Craft
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=48594
Printed Date: March-06-2025 at 4:16am
Topic: Gt40 starter solenoid
Posted By: Mike9812121298
Subject: Gt40 starter solenoid
Date Posted: April-25-2020 at 2:35am
| Working on a 96 gt40 starter solenoid. I can’t find a good wiring diagram to see how to hook it up. There’s two brown wires and don’t know where they go. Any ideas please |
Replies:
Posted By: 8122pbrainard
Date Posted: April-25-2020 at 8:28am
What do the other ends of these brown wires go to? What posts are they connected to on the start relay? ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: KENO
Date Posted: April-25-2020 at 9:28am
Why do you have a picture on PN showing the solenoid with the wires hooked up to it? What's that picture trying to say? Why not put the same picture here? |
Mike9812121298 wrote:Posted By: Mike9812121298
Date Posted: April-25-2020 at 12:14pm
| Sorry I thought I uploaded the pic on here also. I’ll add it. Working on a friends boat that he just got. Came with a bad solenoid and just trying to make sure the wires are correct. I tired to match up to my 95’ but I don’t have the extra wires |
Posted By: Mike9812121298
Date Posted: April-25-2020 at 12:17pm
|
Sorry I thought I uploaded the pic on here also. I’ll add it. Working on a friends boat that he just got. Came with a bad solenoid and just trying to make sure the wires are correct. I tired to match up to my 95’ but I don’t have the extra wires |
Posted By: Mike9812121298
Date Posted: April-25-2020 at 12:19pm
https://ibb.co/gSP5CZx" rel="nofollow">
|
Posted By: KENO
Date Posted: April-25-2020 at 12:35pm
|
If you go to the link below and look at page MT16, you'll find a diagram showing the solenoid wiring that should work. . And make sure the solenoid is bolted to the engine to ground it otherwise things won't work  http://www.correctcraftfan.com/downloads/PCM_GT-40_Owners_Manual_1995-2001.pdf" rel="nofollow - link |
Posted By: Mike9812121298
Date Posted: April-26-2020 at 1:38pm
|
Got it working, He's happy now. Thanks! |