1970 Mustang Parts
Printed From: CorrectCraftFan.com
Category: Buy and Sell
Forum Name: Boat Parts For Sale
Forum Discription: Parts for sale only
URL: http://www.CorrectCraftFan.com/forum/forum_posts.asp?TID=48603
Printed Date: November-21-2024 at 10:46pm
Topic: 1970 Mustang Parts
Posted By: hml6849
Subject: 1970 Mustang Parts
Date Posted: April-27-2020 at 12:36pm
|
I have several parts from a 1970 Mustang to sell. 70c Velvetdrive tranny Mallory YL distributor Ford 289/302 Camshaft, New never used. Ford 289/302 Starter motor Engine Mounts Bell housing,/dust cover Several more. Pics available. 700.00 or BO for all. |
Replies:
Posted By: TRBenj
Date Posted: April-27-2020 at 12:38pm
| Which marinization? Pics of bellhousing and mounts please: trbenj@gmail.com |
Posted By: Southskier
Date Posted: May-13-2020 at 11:56am
|
Hi there, What is the condition of the VelvetDrive tranny? I have a 67 Mustang that I may need some parts for as I am about to start a restoration project. Thanks, Rob |
Posted By: hml6849
Date Posted: May-13-2020 at 12:32pm
|
When it was removed it was working fine. Thanks Howard |
Posted By: wsavini
Date Posted: June-02-2020 at 12:04am
| Hi, Do you have any seat mounts? |
Posted By: hml6849
Date Posted: June-02-2020 at 12:26pm
|
No, sorry |
Posted By: wsavini
Date Posted: June-02-2020 at 12:39pm
| Windshield? |
Posted By: hml6849
Date Posted: June-02-2020 at 12:52pm
|
Sorry. All of my parts are powertrain related |
Posted By: tleed
Date Posted: November-12-2020 at 9:15pm
|
I need a 1" diameter, 40.5" prop shaft, prop strut, and rudder for a 1974 Southwind 18. If any of these parts swap to my boat, I'm interested. I could use an engine cover also.
Still have them? Thomas ------------- Thomas 1974 Southwind 18 with 318 cubic inches of reverse rotation roller cam "Moparvation" |
Posted By: 8122pbrainard
Date Posted: November-13-2020 at 5:43am
|
1970 Mustange shaft length: 40" ------------- /diaries/details.asp?ID=1622" rel="nofollow - 54 Atom /diaries/details.asp?ID=2179" rel="nofollow - 77 Tique 64 X55 Dunphy Keep it original, Pete < |
Posted By: Tommyboy1904
Date Posted: September-01-2021 at 7:52pm
|
still have the rudder? |
Posted By: MohawkMan
Date Posted: October-08-2021 at 12:13pm
|
im looking for a water pump that will fit a '65? have one ?
|
Posted By: HMLane
Date Posted: October-08-2021 at 10:09pm
| Sorry. All my parts are gone. What motor you running? I was able to buy water pumps from skidim.com for my 68 and 70 mustang. |
Posted By: ScottZ
Date Posted: October-11-2021 at 11:00pm
I am pretty sure your boat uses the 11a rudder. I have one I will sell. I may have a shaft as well. ------------- Scott Zuelzke Lake Mitchell , AL 1984 Ski Nautique 1972 Skier |
tleed wrote: